>

MOT History from tests of petrol PIAGGIO VESPAs year 2012

Review the list of common PIAGGIO VESPA failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history
Pass percent:85.94%
(The average a petrol PIAGGIO VESPA year 2012 passes without issue)
Based on:14,563 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment332
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||147
Headlamp not working on dipped beam (4.1.1 (a) (ii))98
Registration plate issues97
Registration plate lamp issues72
Headlamp not working on dipped beam |4.1.1 |a| |ii||51
Rear Brake lever has inadequate reserve travel |3.1.3b|46
Stop lamp remains on when the brakes are released45
Fuel cap sealing washer missing |7.2.2c|40
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||40
Rear Brake lever has insufficient reserve travel (1.1.2 (a))40
Front Brake excessively binding (1.2.1 (f))40
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))30
Exhaust is leaking and excessively noisey |7.1.1b|28
Headlamp not working on main beam (4.1.1 (a) (ii))28
Riders seat insecure |6.2.1a|27
Front Stop lamp not working (4.3.1 (a) (ii))26
Offside Rear Direction indicator not working (4.4.1 (a) (ii))26
Rear Stop lamp not working (4.3.1 (a) (ii))26
Front Roller brake test indicates a binding brake |3.3.A1a|23
Rear Position lamp not working (4.2.1 (a))23
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|22
Exhaust has a major leak of exhaust gases (6.1.2 (a))22
Front Shock absorber has negligible damping effect (5.3.2 (b))21
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))20
Horn not working (7.7 (a) (ii))20
Stop lamp not working (4.3.1 (a) (ii))20
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|19
Steering movement excessively `notchy` with the wheel raised |2.2.1b|19
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))19
Rear Brake lever has insufficient reserve travel |1.1.2 |a||18
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|17
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))17
Rear wheel bearings have excessive free play |2.4.A.2c|16
Front Headlamp not working on main beam (4.1.1 (a) (ii))16
Rear reflector missing (4.8.2 (a) (ii))16
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))16
Horn not working (7.7 (a))16
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||15
Front Brake excessively binding |1.2.1 |f||15
Rear reflector on motorcycle missing |1.4.1|14
Front position lamp does not illuminate immediately when switched on |1.1.3a|14
Headlamp not working on main beam |4.1.1 |a| |ii||14
Riders seat insecure (6.2.5 (a) (ii))14
Steering headbearing has excessive free play |2.2.2|13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|13
Front Position lamp not working (4.2.1 (a))13
Headlamp aim not tested (4.1.2 (b))12
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))12
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))12
Stop lamp not working |4.3.1 |a| |ii||11
Rear Brake excessively binding (1.2.1 (f))11
Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Stop lamp remains on when the brake is released |1.3.1e|10
Front Stop lamp not working |4.3.1 |a| |ii||10
Horn not working |1.7.3a|10
Headlamp aim not tested |4.1.2 |b||10
Rear Brake lever mounting insecure |3.1.2a|9
Front Shock absorber has a serious fluid leak (5.3.2 (b))9
Nearside Front Direction indicator not working (4.4.1 (a) (ii))9
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|8
Rear Stop lamp not working |4.3.1 |a| |ii||8
Headlamp aim not tested |1.6|8
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||8
Rear Wheel bearing has excessive play (5.1.3 (a) (i))8
Fuel cap ineffective (6.1.3 (b) (i))8
Rear Rear reflector missing (4.8.2 (a) (ii))8
Rear Valve stem seriously damaged (5.2.3 (j))8
Offside Rear Direction indicators not working |1.5.1c|7
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||7
Front Floor brake test indicates a binding brake |3.3.C2c|7
Exhaust has a major leak of exhaust gases |6.1.2 |a||7
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||7
All direction indicators not working (4.4.1 (a) (ii))7
Offside Front Direction indicator not working (4.4.1 (a) (ii))7

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy