>

MOT History from tests of petrol PIAGGIO VESPAs year 2011

Review the list of common PIAGGIO VESPA failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history
Pass percent:86.04%
(The average a petrol PIAGGIO VESPA year 2011 passes without issue)
Based on:12,754 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment312
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||119
Registration plate issues104
Rear Brake lever has inadequate reserve travel |3.1.3b|64
Headlamp not working on dipped beam (4.1.1 (a) (ii))58
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||48
Fuel cap sealing washer missing |7.2.2c|45
Exhaust is leaking and excessively noisey |7.1.1b|40
Steering movement excessively `notchy` with the wheel raised |2.2.1b|39
Registration plate lamp issues37
Riders seat insecure |6.2.1a|36
Headlamp not working on dipped beam |4.1.1 |a| |ii||32
Stop lamp remains on when the brakes are released32
Headlamp not working on main beam (4.1.1 (a) (ii))31
Rear Brake lever has insufficient reserve travel (1.1.2 (a))28
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|27
Stop lamp does not illuminate immediately a brake applies |1.3.1a|27
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|27
Steering headbearing has excessive free play |2.2.2|22
Front Brake excessively binding (1.2.1 (f))21
Headlamp not working on main beam |4.1.1 |a| |ii||20
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))20
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|19
Exhaust has a major leak of exhaust gases (6.1.2 (a))19
Rear Stop lamp not working (4.3.1 (a) (ii))19
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|18
Front Stop lamp not working (4.3.1 (a) (ii))18
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||17
Front Roller brake test indicates a binding brake |3.3.A1a|17
Headlamp aim not tested (4.1.2 (b))17
Stop lamp not working (4.3.1 (a) (ii))17
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))17
Nearside Rear Direction indicators not working |1.5.1c|16
Horn not working |1.7.3a|16
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|16
Rear reflector on motorcycle missing |1.4.1|15
Rear Position lamp not working (4.2.1 (a))15
Rear Brake lever has insufficient reserve travel |1.1.2 |a||14
Offside Rear Direction indicator not working (4.4.1 (a) (ii))14
Front Stop lamp not working |4.3.1 |a| |ii||13
Wheel alignment incorrect which adversely affects the steering |2.5.1|13
Offside Rear Direction indicator not working |1.5.1c|13
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))13
Front position lamp does not illuminate immediately when switched on |1.1.3a|12
Rear reflector missing (4.8.2 (a) (ii))12
Horn not working (7.7 (a) (ii))12
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))12
Rear wheel bearings have excessive free play |2.4.A.2c|11
Riders seat insecure (6.2.5 (a) (ii))11
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))11
Front Position lamp not working (4.2.1 (a))11
Stop lamp remains on when the brake is released |1.3.1e|10
Throttle operating incorrectly |6.2.1f|10
Rear Stop lamp not working |4.3.1 |a| |ii||10
Exhaust excessively deteriorated |7.1.1a|10
Rear Brake lever insecure |3.1.2a|9
Offside Rear Direction indicators not working |1.5.1c|9
Front Position lamp not working |4.2.1 |a||9
Headlamp aim not tested |1.6|9
Nearside Rear Direction indicator not working |1.5.1c|9
Stop lamp not working |4.3.1 |a| |ii||9
Front Shock absorber has negligible damping effect (5.3.2 (b))9
Rear Stop lamp remains on when the brake is released |1.3.1e|8
Exhaust has a major leak of exhaust gases |6.1.2 |a||8
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||8
Front Headlamp not working on main beam (4.1.1 (a) (ii))8
Fuel cap ineffective |6.1.3 |b| |i||7
Front Floor brake test indicates a binding brake |3.3.C2c|7
Rear suspension bush has excessive free play |2.4.A2a|i||7
Rear Position lamp not working |4.2.1 |a||7
Brake lever has inadequate reserve travel |3.1.3b|7
Front Shock absorber has a serious fluid leak (5.3.2 (b))7
Rear reflector missing |4.8.2 |a| |ii||6
Front Front suspension has inadequate damping effect. |2.3.6c|6
Front Brake excessively binding |1.2.1 |f||6
Headlamp insecure |1.2.3b|6
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||6
Front suspension has inadequate damping effect. |2.3.6c|6
Nearside Front Direction indicator not working (4.4.1 (a) (ii))6

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy