Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 643 |
Headlamp aim out of alignment | 590 |
Registration plate issues | 290 |
Exhaust is leaking and excessively noisey |7.1.1b| | 273 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 263 |
Riders seat insecure |6.2.1a| | 233 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 199 |
Fuel cap sealing washer missing |7.2.2c| | 185 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 160 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 139 |
Steering headbearing has excessive free play |2.2.2| | 116 |
Horn not working |1.7.3a| | 109 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 103 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 95 |
Exhaust excessively deteriorated |7.1.1a| | 91 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 87 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 87 |
Headlamp aim not tested |1.6| | 85 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 72 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 71 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 58 |
Rear reflector on motorcycle missing |1.4.1| | 52 |
Registration plate lamp issues | 51 |
Front suspension has inadequate damping effect. |2.3.6c| | 44 |
Direction indicators not working |1.5.1c| | 42 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 41 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 38 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 37 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 36 |
Offside Rear Direction indicator not working |1.5.1c| | 35 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 34 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 34 |
Stop lamp remains on when the brake is released |1.3.1e| | 33 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 33 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 33 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 32 |
Headlamp aim beam image kick up to the offside |1.6| | 30 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 30 |
Nearside Rear Direction indicator not working |1.5.1c| | 29 |
Throttle operating incorrectly |6.2.1f| | 29 |
Offside Rear Direction indicators not working |1.5.1c| | 28 |
Front wheel bearings have excessive free play |2.3.5b| | 27 |
Brake lever has inadequate reserve travel |3.1.3b| | 27 |
Horn not loud enough to be heard by another road user |1.7.3a| | 26 |
Indicator switch defective |1.5.4| | 26 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 24 |
Stop lamp remains on when the brakes are released | 23 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 23 |
Nearside Front Direction indicator not working |1.5.1c| | 23 |
Nearside Rear Direction indicators not working |1.5.1c| | 23 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 23 |
Front shock absorber seal failed and leaking oil |2.3.3| | 22 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 22 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 20 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 20 |
Rear Brake lever mounting insecure |3.1.2a| | 19 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 19 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 19 |
Nearside Direction indicator not working |1.5.1c| | 19 |
Headlamp aim not tested (4.1.2 (b)) | 19 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 19 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 18 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 18 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 17 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 17 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 16 |
Rear Brake lever insecure |3.1.2a| | 16 |
Rear Direction indicator not working |1.5.1c| | 15 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 15 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 15 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 15 |
Front Brake excessively binding (1.2.1 (f)) | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 15 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 14 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 14 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 14 |
Rear Position lamp not working (4.2.1 (a)) | 14 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 14 |