Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Registration plate issues | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp insecure |4.1.1 |c|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front suspension has an inadequate repair of a load bearing member or its supporting structure. |2.3.8| | 1 |
Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Fairings insecure and likely to impede the steering mud guard |2.1.2e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Registration plate lamp issues | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
Vehicle identification number incomplete (0.2 (b)) | 1 |