Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Registration plate issues | 4 |
Horn not working |1.7.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Centre Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Front Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Central Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Fuel system component leaking Fuel gauge |7.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Vehicle identification number not displayed |0.2 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
All direction indicators incorrect colour |4.4.3 |a|| | 1 |
Offside Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Offside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Exhaust has part of the system missing |7.1.1a| | 1 |
Central Front Upper Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Central Front Upper Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Central Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Central Front Lower Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp aim not tested |1.6| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Lower Forks insecure (2.2.2 (d) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Stop lamp missing (4.3.1 (a) (ii)) | 1 |
Steering operation impeded by a fairing front mudguard not secure (2.1.4 (e)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock steering stop innafective (2.1.4 (a)) | 1 |
Front Brake grabbing severely brake not returning (1.2.1 (c)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |