Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Registration plate issues | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake cable excessively corroded |3.2.A1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Upper Steering lock stop loose |2.1.3| | 1 |
Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front suspension spring fractured |2.2.1b|I|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Horn not working |1.7.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Horn control not functioning. |1.7.2b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Front Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Front Brake cable guide defective and affecting operation |1.1.15 |d|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Stop lamp missing on front brake |1.3.3a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded pivot |3.2.A1h| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Motorcycle structure is fractured and structural rigidity is significantly reduced Luggage rack / back rest cracked and insecure. (6.1.1 (a) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Stop lamp not working on front lever (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Registration plate lamp issues | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Rear Stop lamp remains on when the brake is released (1.3.1e) | 1 |
Upper Riders seat insecure (6.2.1a) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working not working on front brake lever (4.3.1 (a) (ii)) | 1 |
Front Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel hub damaged to the extent that wheel security is adversely affected (5.2.1 (b) (ii)) | 1 |
Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Upper Steering headbearing has excessive free play (2.2.2) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b) | 1 |
Front Brake lever insecure locking nut missing! (1.1.2 (e) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |