Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Headlamp aim out of alignment | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Horn not working |1.7.3a| | 4 |
Registration plate issues | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering linkage has excessive free play |2.2.2| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear wheel insecure |4.2.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. fork pivot seized |2.3.6b| | 1 |
Front suspension has inadequate damping effect. unable to test front shock>pivot siezed |2.3.6c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Front Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Offside Motorcycle structure cracked |6.1.1a| | 1 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Brake lever mounting cracked |3.1.2c| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Central Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Central Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Central Front Lower Horn control not functioning. |1.7.2b| | 1 |
Central Rear Upper Riders seat insecure |6.2.1a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front Wheel fixing missing (multiple fixings) spindle split pin (5.2.1 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Exhaust silencer insecure rear mount missing (8.1.1 (b) (i)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |