Most common failures | No# failures |
---|
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Headlamp aim out of alignment | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Handlebar fractured |2.1.1b| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Front Brake cable badly frayed |3.2.A1b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Horn control defective |1.7.2a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Riders seat insecure |6.2.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn is not continous or uniform intermitant |1.7.3c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Brake rod excessively damaged |3.2.A1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Registration plate lamp issues | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride wheel |6.2.1h| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |