Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp aim out of alignment | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Exhaust mounting does not fully support the exhaust system exhaust assy not secure |7.1.1.c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Motorcycle structure cracked |6.1.1a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Offside Front Brake locking device insecure |3.2.A1e| | 1 |
Registration plate issues | 1 |
Gradient brake test indicates a severely juddering brake |3.3.D1d| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Front wheel spindle loose |2.3.5a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |