MOT History from tests of petrol PIAGGIO TYPHOON50s year 2003

Review the list of common PIAGGIO TYPHOON50 failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history

Pass percent:68.82%

(The average a petrol PIAGGIO TYPHOON50 year 2003 passes without issue)

Based on:93 MOT Tests

Most common failures	No# failures
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	4
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn not working \|1.7.3a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Headlamp aim out of alignment	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Brake lever cannot be released smoothly \|3.1.3d\|	1
Front Horn not working \|1.7.3a\|	1
Front Brake lever mounting insecure \|3.1.2a\|	1
Fuel cap sealing washer missing \|7.2.2c\|	1
Horn control defective \|1.7.2a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Brake lever mounting insecure \|3.1.2a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Direction indicators not working \|1.5.1c\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Riders seat insecure \|6.2.1a\|	1
Headlamp aim not tested \|1.6\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	4
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn not working \|1.7.3a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Headlamp aim out of alignment	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Brake lever cannot be released smoothly \|3.1.3d\|	1
Front Horn not working \|1.7.3a\|	1
Front Brake lever mounting insecure \|3.1.2a\|	1
Fuel cap sealing washer missing \|7.2.2c\|	1
Horn control defective \|1.7.2a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Brake lever mounting insecure \|3.1.2a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Direction indicators not working \|1.5.1c\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Riders seat insecure \|6.2.1a\|	1
Headlamp aim not tested \|1.6\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1

MOT History from tests of petrol PIAGGIO TYPHOON50s year 2003

Find us on Facebook