| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 17 |
| Registration plate lamp issues | 12 |
| Registration plate issues | 10 |
| Stop lamp remains on when the brakes are released | 8 |
| Front Brake excessively binding (1.2.1 (f)) | 8 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Brake cable insecure | 2 |
| Exhaust system insecure |6.1.2 |a|| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Horn not working |1.7.3a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Horn missing |1.7.1| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Wheel fixing missing |single fixing| split pin |5.2.1 |a| |ii|| | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock screen bracket |2.1.4 |b|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Stop lamp does not illuminate immediately a brake applies with front brake |1.3.1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected THROTTLE NOT RETURNING ON FULL LOCK |6.2.7 |a| |ii|| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component both |2.3.4| | 1 |
| Front Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Rear Suspension component pin or bush excessively worn Engine mounting |rear suspension bearings | |5.3.4 |a| |i|| | 1 |
| Fuel cap missing |6.1.3 |b| |i|| | 1 |
| Fuel cap missing |7.2.2a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded brake seized |3.2.A1h| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp does not emit a steady light front lever |1.3.1b| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Nearside Rear Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake drum significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Headlamp at least one does not illuminate on dipped beam Headlight has melted |1.2.2a|i|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies brake light not working when front brake applied. |1.3.1a| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp insecure inc body panel |1.2.3b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear suspension bush has excessive free play engine mounts |2.4.A2a|i|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Steering linkage locking device missing |2.1.3 |d|| | 1 |
| Front Brake performance not tested brake binding (1.2.1 (g)) | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Stop lamp not working both (4.3.1 (a) (ii)) | 1 |
| Offside Front Lower Suspension component missing stans/bolt (5.3.3 (a) (ii)) | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Stop lamp not working frt & rear (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Fairing (6.1.1 (b) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Offside Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Front Shock absorber has a serious fluid leak Both front (5.3.2 (b)) | 1 |
| Rear Suspension arm pin or bush excessively worn Rear swing arm bush (5.3.4 (a) (i)) | 1 |
| Brake performance not tested Not tested due to excessive brake bind (1.2.1 (g)) | 1 |
| Throttle operating incorrectly Sticking open (6.2.7 (a) (i)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Lower Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Suspension attachment bracket/mounting insecure centre stand (5.3.3 (a) (i)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Central Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
| Nearside Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Fuel pipe damaged (6.1.3 (c) (ii)) | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake lever pivot excessively worn (1.1.1 (b)) | 1 |
| Steering headbearing excessively stiff or notchy excessively notchy (2.2.2 (f) (i)) | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Nearside Front Shock absorber likely to become detached bolts loose and insecure (5.3.2 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak forks corroded leading to fork oil loss (5.3.2 (b)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Shock absorber has negligible damping effect No damping from front end. (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Shock absorber has negligible damping effect none (5.3.2 (b)) | 1 |