Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 50 |
Headlamp aim out of alignment | 47 |
Rear reflector on motorcycle missing |1.4.1| | 40 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 35 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 33 |
Exhaust is leaking and excessively noisey |7.1.1b| | 28 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 27 |
Steering headbearing has excessive free play |2.2.2| | 24 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 24 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 22 |
Horn not working |1.7.3a| | 21 |
Riders seat insecure |6.2.1a| | 21 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 18 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 17 |
Rear reflector on motorcycle obscured |1.4.1| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Throttle operating incorrectly |6.2.1f| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 13 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
Offside Front Direction indicator not working |1.5.1c| | 12 |
Nearside Front Direction indicator not working |1.5.1c| | 12 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
Registration plate issues | 11 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 10 |
Front Brake lever insecure |3.1.2a| | 9 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 9 |
Direction indicators not working |1.5.1c| | 8 |
Offside Rear Direction indicator not working |1.5.1c| | 8 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 7 |
Headlamp switch faulty |1.2.4| | 7 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 7 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front Brake lever mounting insecure |3.1.2a| | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 5 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 5 |
Stop lamp emits other than a steady red light |1.3.1b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 5 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Headlamp aim not tested |1.6| | 4 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Direction indicators not working |1.5.1c| | 4 |
Offside Direction indicator not working |1.5.1c| | 4 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Indicator tell tale not functioning |1.5.2| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear position lamp incorrect colour |1.1.2b| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Front Direction indicators not working |1.5.1c| | 3 |
Direction indicator not working |1.5.1c| | 3 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Indicator switch defective |1.5.4| | 3 |
Nearside Direction indicator not working |1.5.1c| | 3 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Horn control defective |1.7.2a| | 2 |
Seat insecure |6.2.1a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Brake lever insecure |3.1.2a| | 2 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Position lamp switch faulty |1.1.4a| | 2 |
Offside Front An item not tested |Manual| | 2 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Brake lever mounting insecure |3.1.2a| | 2 |
Brake lever mounting cracked |3.1.2c| | 2 |
Front Brake lever is inoperative |3.1.3c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |