Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Horn not working |1.7.3a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 5 |
Registration plate issues | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Direction indicator not working |1.5.1c| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Centre Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Lower Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Centre Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators not working |1.5.1c| | 1 |
An item not tested |Manual| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |