>

MOT History from tests of petrol PIAGGIO SKIPPERs year 2004

Review the list of common PIAGGIO SKIPPER failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history
Pass percent:70.48%
(The average a petrol PIAGGIO SKIPPER year 2004 passes without issue)
Based on:3,818 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment201
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||102
Rear suspension bush has excessive free play |2.4.A2a|i||92
Steering headbearing has excessive free play |2.2.2|69
Rear reflector on motorcycle missing |1.4.1|64
Rear Brake lever has inadequate reserve travel |3.1.3b|60
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||59
Exhaust is leaking and excessively noisey |7.1.1b|58
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|50
Nearside Indicator tell tale not functioning |1.5.2|49
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|47
Fuel cap sealing washer missing |7.2.2c|38
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|34
Offside Steering lock stop ineffective |2.1.3|34
Rear reflector on motorcycle obscured |1.4.1|31
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|29
Horn not working |1.7.3a|24
Nearside Steering lock stop ineffective |2.1.3|23
Headlamp switch faulty |1.2.4|23
Steering movement excessively `notchy` with the wheel raised |2.2.1b|23
Exhaust excessively deteriorated |7.1.1a|22
Stop lamp does not illuminate immediately a brake applies |1.3.1a|22
Riders seat insecure |6.2.1a|21
Front Roller brake test indicates a binding brake |3.3.A1a|21
Front position lamp does not illuminate immediately when switched on |1.1.3a|21
Rear suspension bearing has excessive free play |2.4.A2a|i||20
Front suspension has inadequate damping effect. |2.3.6c|18
Indicator switch defective |1.5.4|18
Throttle operating incorrectly |6.2.1f|17
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|16
Offside Rear Footrest missing |6.2.1a|15
Front shock absorber seal failed and leaking oil |2.3.3|13
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||12
Offside Front shock absorber seal failed and leaking oil |2.3.3|12
Wheel alignment incorrect which adversely affects the steering |2.5.1|12
Nearside Indicator tell tale not operating correctly |1.5.2|12
Wheel alignment incorrect which adversely affects the handling |2.5.1|11
Nearside Front shock absorber seal failed and leaking oil |2.3.3|11
Rear suspension bush excessively deteriorated |2.4.A2a|i||11
Front Floor brake test indicates a binding brake |3.3.C2c|10
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|10
Indicator tell tale not operating correctly |1.5.2|10
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|10
Rear Rear suspension bush has excessive free play |2.4.A2a|i||10
Headlamp aim not tested |1.6|10
Steering movement excessively stiff with the wheel raised |2.2.1b|9
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|9
Rear shock absorber has inadequate damping effect. |2.4.A.3b|9
Front Brake lever has inadequate reserve travel |3.1.3b|8
Offside Indicator tell tale not functioning |1.5.2|8
Registration plate issues8
Stop lamp remains on when the brake is released |1.3.1e|8
Indicator tell tale not functioning |1.5.2|8
Rear reflector on motorcycle obscured |1.4.2b|8
Headlamp not working on dipped beam (4.1.1 (a) (ii))8
Front Steering headbearing has excessive free play |2.2.2|7
Exhaust mounting does not fully support the exhaust system |7.1.1.c|7
Nearside Rear Footrest missing |6.2.1a|7
Nearside Steering lock stop missing |2.1.3|7
Front Front shock absorber seal failed and leaking oil |2.3.3|7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Headlamp not working on main beam (4.1.1 (a) (ii))7
Front Front suspension has inadequate damping effect. |2.3.6c|6
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|6
Offside Steering lock stop missing |2.1.3|6
Horn not loud enough to be heard by another road user |1.7.3a|6
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|6
Brake lever has inadequate reserve travel |3.1.3b|6
Offside Front Steering lock stop ineffective |2.1.3|6
Direction indicators not working |1.5.1c|6
Rear Rear reflector on motorcycle missing |1.4.1|6
Front mudguard insecure |2.3.7|6
Headlamp insecure |1.2.3b|6
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Horn control defective |1.7.2a|5
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Front suspension assembly component excessively corroded. |2.3.1|5
Nearside Brake lever has inadequate reserve travel |3.1.3b|5
Direction indicator not working |1.5.1c|5
Fuel pipe leaking |7.2.1a|5
Front Stop lamp remains on when the brake is released |1.3.1e|5
Rear Exhaust is leaking and excessively noisey |7.1.1b|5
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Rear Rear reflector on motorcycle obscured |1.4.1|5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
All position lamps do not illuminate immediately when switched on |1.1.3a|4
Handlebar deformed |2.1.1b|4
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|4
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|4
Fuel hose leaking |7.2.1a|4
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|4
Front Brake lever insecure |3.1.2a|4
Rear Brake lever insecure |3.1.2a|4
Front Steering lock stop ineffective |2.1.3|4
Rear wheel bearings have excessive free play |2.4.A.2c|4
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|4
Front Brake disc|s| excessively worn |3.2.A1l|4
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|4
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|4
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|4
Offside Rear suspension bush has excessive free play |2.4.A2a|i||4
Stop lamp remains on when the brakes are released4
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|4
Nearside Direction indicator not working |1.5.1c|4
Nearside Front Direction indicators not working |1.5.1c|4
Horn not working (7.7 (a) (ii))4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy