>

MOT History from tests of petrol PIAGGIO PXs year 1999

Review the list of common PIAGGIO PX failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history
Pass percent:82.06%
(The average a petrol PIAGGIO PX year 1999 passes without issue)
Based on:2,748 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment73
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||37
Registration plate issues35
Front position lamp does not illuminate immediately when switched on |1.1.3a|25
Stop lamp does not illuminate immediately a brake applies |1.3.1a|25
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|23
Horn not loud enough to be heard by another road user |1.7.3a|20
Horn not working |1.7.3a|16
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||16
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Nearside Front Direction indicator not working |1.5.1c|13
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Exhaust is leaking and excessively noisey |7.1.1b|12
Rear wheel bearings have excessive free play |2.4.A.2c|12
Offside Rear Direction indicators not working |1.5.1c|11
Riders seat insecure |6.2.1a|10
Offside Rear Direction indicator not working |1.5.1c|10
Direction indicators not working |1.5.1c|10
Nearside Front Direction indicators not working |1.5.1c|9
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||9
Headlamp aim beam image kick up to the offside |1.6|9
Nearside Rear Direction indicators not working |1.5.1c|8
Steering headbearing has excessive free play |2.2.2|7
Front wheel bearings have excessive free play |2.3.5b|7
Headlamp not working on dipped beam (4.1.1 (a) (ii))7
Stop lamp remains on when the brake is released |1.3.1e|7
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))6
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|6
Front Roller brake test indicates a binding brake |3.3.A1a|6
Steering movement excessively `notchy` with the wheel raised |2.2.1b|6
Offside Front Direction indicators not working |1.5.1c|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Offside Rear Direction indicator not working (4.4.1 (a) (ii))5
Front Stop lamp remains on when the brake is released |1.3.1e|5
Rear reflector on motorcycle missing |1.4.1|5
Indicator tell tale not functioning |1.5.2|5
Rear Stop lamp remains on when the brake is released |1.3.1e|5
Rear wheel has a loose wheel nut|s| |4.2.3a|5
Rear Direction indicator not working |1.5.1c|5
Steering movement excessively stiff with the wheel raised |2.2.1b|5
Rear Brake pedal cannot be released smoothly |3.1.3d|5
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|5
Stop lamp remains on when the brakes are released5
Front Direction indicator not working |1.5.1c|4
Horn not working (7.7 (a) (ii))4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Front Front wheel bearings have excessive free play |2.3.5b|4
Rear Position lamp not working (4.2.1 (a))4
Front Horn not loud enough to be heard by another road user |1.7.3a|4
Brake locking device insecure |3.2.A1e|4
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Offside Rear Direction indicator incorrect colour |1.5.1b|3
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))3
Rear Direction indicators not working |1.5.1c|3
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|3
Rear Rear reflector on motorcycle missing |1.4.1|3
Brake pedal has inadequate reserve travel |3.1.3b|3
Rear wheel spindle securing nut|s| loose |2.4.A.2b|3
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|3
Rear Exhaust is leaking and excessively noisey |7.1.1b|3
All position lamps do not illuminate immediately when switched on |1.1.3a|3
Handlebar mounting clamp bolt loose |2.1.1a|3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Nearside Rear Direction indicator not working |1.5.1c|3
Front Brake lever cannot be applied smoothly |3.1.3d|3
Brake lever cannot be applied smoothly |3.1.3d|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Rear Rear wheel has a loose wheel nut|s| |4.2.3a|2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Direction indicator not working |1.5.1c|2
Rear Position lamp not working |4.2.1 |a||2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Direction indicator incorrect colour |1.5.1b|2
Rear Brake lever has inadequate reserve travel |3.1.3b|2
All position lamps adversely affected by the operation of another lamp |1.1.3b|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Throttle operating incorrectly |6.2.1f|2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))2
Rear Floor brake test indicates a sticking brake |3.3.C2c|2
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))2
Front Steering headbearing has excessive free play |2.2.2|2
Offside Indicator tell tale not functioning |1.5.2|2
Nearside Front Direction indicator not working (4.4.1 (a) (ii))2
Rear Brake pedal cannot be applied smoothly |3.1.3d|2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Offside Rear Direction indicator not working |4.4.1 |a| |ii||2
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c|2
Offside Steering lock stop ineffective |2.1.3|2
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Headlamp not working on main beam |4.1.1 |a| |ii||2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Headlamp insecure |1.2.3b|2
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||2
Front Brake hose leaking fluid |3.2.B4|2
Offside Front Direction indicator not working |1.5.1c|2
Front Horn not working |1.7.3a|2
Front position lamp incorrect colour |1.1.2a|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
All direction indicators not working (4.4.1 (a) (ii))2
Rear Stop lamp not working (4.3.1 (a) (ii))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy