Most common failures | No# failures |
---|
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Headlamp aim out of alignment | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Upper Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering damper ineffective |2.1.2d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not working |1.7.3a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |