MOT History from tests of petrol PIAGGIO FLYs year 2010

Review the list of common PIAGGIO FLY failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history

Pass percent:71.94%

(The average a petrol PIAGGIO FLY year 2010 passes without issue)

Based on:2,167 MOT Tests

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	117
Headlamp aim out of alignment	62
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	39
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	32
Front Roller brake test indicates a binding brake \|3.3.A1a\|	31
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	27
Steering headbearing has excessive free play \|2.2.2\|	22
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	15
Exhaust is leaking and excessively noisey \|7.1.1b\|	15
Horn not working \|1.7.3a\|	14
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	14
Front Floor brake test indicates a binding brake \|3.3.C2c\|	13
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	12
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	12
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	11
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	10
Registration plate lamp issues	10
Stop lamp remains on when the brakes are released	10
Riders seat insecure \|6.2.1a\|	9
Headlamp not working on dipped beam (4.1.1 (a) (ii))	9
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	8
Headlamp aim not tested \|1.6\|	8
Headlamp not working on main beam (4.1.1 (a) (ii))	8
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Front Brake excessively binding \|1.2.1 \|f\|\|	6
Registration plate issues	6
Fuel cap sealing washer missing \|7.2.2c\|	6
Headlamp aim not tested (4.1.2 (b))	6
Throttle operating incorrectly \|6.2.1f\|	6
Front Stop lamp not working (4.3.1 (a) (ii))	6
Front Stop lamp remains on when the brake is released \|1.3.1e\|	6
Indicator switch defective \|1.5.4\|	6
Rear reflector on motorcycle missing \|1.4.1\|	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Headlamp aim not tested \|4.1.2 \|b\|\|	5
Nearside Direction indicator not working \|1.5.1c\|	5
Stop lamp not working (4.3.1 (a) (ii))	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Brake excessively binding (1.2.1 (f))	5
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	5
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	4
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Front Steering headbearing has excessive free play \|2.2.2\|	4
Exhaust has a major leak of exhaust gases (6.1.2 (a))	4
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	4
Rear suspension bearing excessively deteriorated \|2.4A.2a\|i\|\|	4
Horn not working (7.7 (a) (ii))	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Direction indicators not working \|1.5.1c\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))	3
Suspension component pin or bush excessively worn (5.3.4 (a) (i))	3
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Horn not loud enough to be heard by another road user \|1.7.3a\|	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	3
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	3
Front Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Front Position lamp not working \|4.2.1 \|a\|\|	3
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3
Front Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))	3
Brake hose damaged	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Position lamp switch faulty \|1.1.4a\|	2
Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Horn not working (7.7 (a))	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp does not illuminate immediately a brake applies front brake \|1.3.1a\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Lower Suspension component pin or bush excessively worn \|5.3.4 \|a\| \|i\|\|	2
Rear Valve stem seriously damaged \|5.2.3 \|j\|\|	2
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	2
Horn control not functioning. \|1.7.2b\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Throttle operating incorrectly \|6.2.7 \|a\| \|i\|\|	2
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	2
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	2
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Steering lock stop ineffective \|2.1.3\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Position lamp not working (4.2.1 (a))	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))	2
Rear Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))	2
Indicator switch inoperative (4.4.2 (a) (ii))	2
All direction indicators not working (4.4.1 (a) (ii))	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Rear Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Front Roller brake test indicates a binding brake (3.3.A1a)	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Exhaust system insecure \|6.1.2 \|a\|\|	2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	2
Front Horn not working \|1.7.3a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	117
Headlamp aim out of alignment	62
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	39
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	32
Front Roller brake test indicates a binding brake \|3.3.A1a\|	31
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	27
Steering headbearing has excessive free play \|2.2.2\|	22
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	15
Exhaust is leaking and excessively noisey \|7.1.1b\|	15
Horn not working \|1.7.3a\|	14
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	14
Front Floor brake test indicates a binding brake \|3.3.C2c\|	13
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	12
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	12
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	11
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	10
Registration plate lamp issues	10
Stop lamp remains on when the brakes are released	10
Riders seat insecure \|6.2.1a\|	9
Headlamp not working on dipped beam (4.1.1 (a) (ii))	9
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	8
Headlamp aim not tested \|1.6\|	8
Headlamp not working on main beam (4.1.1 (a) (ii))	8
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Front Brake excessively binding \|1.2.1 \|f\|\|	6
Registration plate issues	6
Fuel cap sealing washer missing \|7.2.2c\|	6
Headlamp aim not tested (4.1.2 (b))	6
Throttle operating incorrectly \|6.2.1f\|	6
Front Stop lamp not working (4.3.1 (a) (ii))	6
Front Stop lamp remains on when the brake is released \|1.3.1e\|	6
Indicator switch defective \|1.5.4\|	6
Rear reflector on motorcycle missing \|1.4.1\|	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Headlamp aim not tested \|4.1.2 \|b\|\|	5
Nearside Direction indicator not working \|1.5.1c\|	5
Stop lamp not working (4.3.1 (a) (ii))	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Brake excessively binding (1.2.1 (f))	5
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	5
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	4
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Front Steering headbearing has excessive free play \|2.2.2\|	4
Exhaust has a major leak of exhaust gases (6.1.2 (a))	4
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	4
Rear suspension bearing excessively deteriorated \|2.4A.2a\|i\|\|	4
Horn not working (7.7 (a) (ii))	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Direction indicators not working \|1.5.1c\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))	3
Suspension component pin or bush excessively worn (5.3.4 (a) (i))	3
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Horn not loud enough to be heard by another road user \|1.7.3a\|	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	3
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	3
Front Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Front Position lamp not working \|4.2.1 \|a\|\|	3
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3
Front Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))	3
Brake hose damaged	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Position lamp switch faulty \|1.1.4a\|	2
Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Horn not working (7.7 (a))	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp does not illuminate immediately a brake applies front brake \|1.3.1a\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Lower Suspension component pin or bush excessively worn \|5.3.4 \|a\| \|i\|\|	2
Rear Valve stem seriously damaged \|5.2.3 \|j\|\|	2
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	2
Horn control not functioning. \|1.7.2b\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Throttle operating incorrectly \|6.2.7 \|a\| \|i\|\|	2
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	2
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	2
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Steering lock stop ineffective \|2.1.3\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Position lamp not working (4.2.1 (a))	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))	2
Rear Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))	2
Indicator switch inoperative (4.4.2 (a) (ii))	2
All direction indicators not working (4.4.1 (a) (ii))	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Rear Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Front Roller brake test indicates a binding brake (3.3.A1a)	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Exhaust system insecure \|6.1.2 \|a\|\|	2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	2
Front Horn not working \|1.7.3a\|	2

MOT History from tests of petrol PIAGGIO FLYs year 2010

Find us on Facebook