Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 158 |
Headlamp aim out of alignment | 108 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 71 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 44 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 42 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 40 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 35 |
Steering headbearing has excessive free play |2.2.2| | 24 |
Stop lamp remains on when the brake is released |1.3.1e| | 24 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 24 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Registration plate issues | 21 |
Horn not working |1.7.3a| | 21 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 20 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 19 |
Fuel cap sealing washer missing |7.2.2c| | 18 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 18 |
Exhaust is leaking and excessively noisey |7.1.1b| | 17 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Riders seat insecure |6.2.1a| | 15 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Registration plate lamp issues | 14 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 14 |
Headlamp aim not tested |1.6| | 14 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 12 |
Front Brake excessively binding (1.2.1 (f)) | 12 |
Front Brake excessively binding |1.2.1 |f|| | 11 |
Throttle operating incorrectly |6.2.1f| | 11 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 10 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Front suspension has inadequate damping effect. |2.3.6c| | 9 |
Stop lamp remains on when the brakes are released | 9 |
Exhaust excessively deteriorated |7.1.1a| | 8 |
Rear position lamp incorrect colour |1.1.2b| | 8 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 8 |
Stop lamp emits other than a steady red light |1.3.1b| | 8 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 7 |
Direction indicators not working |1.5.1c| | 7 |
Indicator switch defective |1.5.4| | 7 |
Offside Steering lock stop ineffective |2.1.3| | 7 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 7 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 7 |
Nearside Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 7 |
Offside Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 7 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Nearside Direction indicators not working |1.5.1c| | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Horn not working |7.7 |a| |ii|| | 5 |
Headlamp aim not tested (4.1.2 (b)) | 5 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Offside Indicator tell tale not functioning |1.5.2| | 5 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake lever insecure |3.1.2a| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
Nearside Indicator tell tale not functioning |1.5.2| | 4 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 4 |
Rear Brake lever mounting insecure |3.1.2a| | 4 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 4 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 3 |
Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Horn control not functioning. |1.7.2b| | 3 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Front Brake hose fouling |3.2.B3b| | 3 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Brake lever attachment screws missing |3.1.2b| | 3 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 3 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |