| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 3 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim beam image kick-up is to the offside (1.6.1) | 1 |
| Horn is not continous or uniform (1.7.3c) | 1 |
| Handlebar mounting clamp loose (2.1.1a) | 1 |
| Riders seat insecure (6.2.1a) | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Steering lock stop missing |2.1.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Direction indicator deteriorated and function impaired All indicators affected by the engine revs,due to the battery having low charge! |1.5.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system Bolt missing in rear of exhaust,|broken off| |7.1.1.c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |