MOT History from tests of petrol PGO RODOs year 2001

Review the list of common PGO RODO failures below or to perform a specific mot history check on your PGO then use our popular KnowYourCar service

mot history

Pass percent:81.25%

(The average a petrol PGO RODO year 2001 passes without issue)

Based on:48 MOT Tests

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Headlamp insecure \|1.2.3b\|	1
Headlamp aim out of alignment	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Headlamp insecure \|1.2.3b\|	1
Headlamp aim out of alignment	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1

MOT History from tests of petrol PGO RODOs year 2001

Find us on Facebook