Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Fuel system component leaking Carburetor overflow leaking on side stand (6.1.3 (b) (i)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
All position lamps not working (4.2.1 (a)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn not working |1.7.3a| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension bush has excessive free play Swingarm bearings |2.4.A2a|i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Upper Suspension component pin or bush excessively worn Top shock mount |5.3.4 |a| |i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Fuel system component leaking Carb |7.2.1a| | 1 |
Offside Brake component is fractured Lever clamp |3.1.5| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear suspension bush has excessive free play Shock bushes |2.4.A2a|i|| | 1 |
Rear suspension bush has excessive free play Swingarm bushes |2.4.A2a|i|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Registration plate issues | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |