Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 25 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Headlamp aim out of alignment | 10 |
Drive chain excessively loose |6.2.1d| | 8 |
Registration plate issues | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Fuel system component leaking |7.2.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Horn not working |1.7.3a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Horn missing |1.7.1| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Footrest missing (6.2.12 (a)) | 1 |
Offside Front Stop lamp not working brake lever (4.3.1 (a) (ii)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Headlamp switch insecure |1.2.4| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Chain guard insecure |6.2.1c| | 1 |