Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Horn not working |1.7.3a| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp switch faulty |1.2.4| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Brake excessively binding Front |1.2.1 |f|| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Registration plate issues | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Registration plate lamp issues | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Fuel system component leaking fuel filter |7.2.1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released front brake light switch |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on number plate light |1.1.3a| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Nearside Headlamp switch insecure dip, main beam, horn |1.2.4| | 1 |
Direction indicators affected by the operation of another lamp horn |1.5.1c| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Indicator switch defective |1.5.4| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp remains on when the brake is released Rear lever |1.3.1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Inner Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Nearside Shock absorber has a serious fluid leak fork leg (5.3.2 (b)) | 1 |
Throttle operating incorrectly hangs on to revs at idle (6.2.7 (a) (i)) | 1 |
Offside Front Stop lamp not working brake switch sticking (4.3.1 (a) (ii)) | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Front Shock absorber has negligible damping effect forks Seized (5.3.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Fuel cap ineffective seal missing (6.1.3 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases header pipe leaking (6.1.2 (a)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |