Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 15 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Horn not working |1.7.3a| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Registration plate issues | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Stop lamp remains on when the brakes are released | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Handlebar mounting clamp loose |2.1.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Offside Direction indicators not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering linkage has excessive free play |2.2.2| | 2 |
Nearside Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Direction indicators not working all |1.5.1c| | 2 |
Brake hose damaged | 2 |
Riders seat insecure |6.2.1a| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Brake hose which buldges |3.2.B4| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Centre Front Horn not working |1.7.3a| | 2 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Offside Front Upper Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear mono-shock pivot excessively worn top mounting |2.4.B.4| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Direction indicators not working All |1.5.1c| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Steering headbearing has excessive free play very knotchy and sticks in the straight ahead position |2.2.2| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Offside Rear Brake lever insecure |3.1.2a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Indicator switch defective |1.5.4| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Wheel alignment incorrect which adversely affects the steering Front locking bolt appears loose? |2.5.1| | 1 |
Front Brake component is excessively corroded pads seperated. |3.1.5| | 1 |
Rear Rear suspension bush has excessive free play shocker |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort brake lever pulls to the handlegrip |3.3.A1c| | 1 |
Exhaust mounting does not fully support the exhaust system loose |7.1.1.c| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Roller brake test indicates a binding brake slight bind |3.3.A1a| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected insecure |6.2.7 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Outer Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake lever |1.3.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp switch faulty full beam triggers main beam to switch off |1.2.4| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp not working rear lever |4.3.1 |a| |ii|| | 1 |
Central Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Central Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Upper Direction indicators not working |1.5.1c| | 1 |
Offside Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Central Rear Motorcycle structure joining/attachment plate or fastening insecure mud guard and no-plate |6.1.1 |b| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Central Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Handlebar mounting insecure R/H Swith gear. (2.2.1 (a) (i)) | 1 |
Rear Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Brake hose excessively deteriorated | 1 |
Central Front Upper Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Nearside Front Direction indicator not working does not always work when switched to the left (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working does not always work when switched to the left (4.4.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel brake lever insufficient pressure and comes to bar (1.1.2 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake excessively binding binding excessively once brakes applied and released (1.2.1 (f)) | 1 |
Rear Brake excessively binding rear brake remains stuck on when lever released (1.2.1 (f)) | 1 |
Brake caliper inadequately mounted and braking performance affected Caliper floating pins, not floating caliper and bending disc. resulting in no reserve travel. (1.1.16 (c) (ii)) | 1 |
Fuel cap ineffective seal missing (6.1.3 (b) (i)) | 1 |
Central Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Stop lamp not working from rear (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect not returning (5.3.2 (b)) | 1 |
Exhaust has a major leak of exhaust gases Blowing at cylinder head (6.1.2 (a)) | 1 |
Nearside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases fractured downpipe from manifold (6.1.2 (a)) | 1 |