MOT History from tests of diesel PEUGEOT VANs year 1998

Review the list of common PEUGEOT VAN failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a diesel PEUGEOT VAN year 1998 passes without issue)

Based on:10 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	3
Headlamp aim out of alignment	3
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake pipe excessively corroded	2
Nearside Side repeater not working \|1.4.A.2c\|	1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Offside Rear Direction indicators incorrect colour \|1.4.A.2f\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Horn does not function \|6.2.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	3
Headlamp aim out of alignment	3
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake pipe excessively corroded	2
Nearside Side repeater not working \|1.4.A.2c\|	1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front Passenger`s seat cannot be secured in the upright position. \|6.2.A.2\|	1
Offside Rear Direction indicators incorrect colour \|1.4.A.2f\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Horn does not function \|6.2.1b\|	1

MOT History from tests of diesel PEUGEOT VANs year 1998

Find us on Facebook