>

MOT History from tests of petrol PEUGEOT V CLICs year 2013

Review the list of common PEUGEOT V CLIC failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:78.00%
(The average a petrol PEUGEOT V CLIC year 2013 passes without issue)
Based on:882 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment19
Registration plate issues8
Rear reflector missing (4.8.2 (a) (ii))6
Steering headbearing has excessive free play |2.2.2|5
Rear reflector on motorcycle missing |1.4.1|5
Exhaust excessively deteriorated |7.1.1a|5
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))5
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))5
Exhaust is leaking and excessively noisey |7.1.1b|4
Rear Brake lever has inadequate reserve travel |3.1.3b|4
Stop lamp remains on when the brakes are released4
Front Brake excessively binding (1.2.1 (f))4
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))4
Headlamp not working on dipped beam (4.1.1 (a) (ii))4
Stop lamp not working (4.3.1 (a) (ii))4
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Nearside Steering lock stop ineffective |2.1.3|3
Handlebar mounting clamp loose |2.1.1a|3
Brake hose damaged3
Brake hose excessively deteriorated3
Rear Rear reflector missing (4.8.2 (a) (ii))3
All direction indicators not working (4.4.1 (a) (ii))3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Rear wheel has a loose wheel nut|s| |4.2.3a|2
Riders seat insecure |6.2.1a|2
Handlebar mounting clamp bolt loose |2.1.1a|2
Nearside Steering lock stop maladjusted |2.1.3|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Stop lamp not working |4.3.1 |a| |ii||2
Front Brake excessively binding |1.2.1 |f||2
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Rear position lamp incorrect colour |1.1.2b|2
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4|2
Offside Front Direction indicator not working |1.5.1c|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Front Steering headbearing has excessive free play |2.2.2|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Direction indicators not working |1.5.1c|2
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))2
Rear Brake lever insecure (1.1.2 (e) (i))2
Fuel cap leaking (6.1.3 (b) (i))2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Rear Brake excessively binding (1.2.1 (f))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
All position lamps not working (4.2.1 (a))2
Rear Position lamp not working (4.2.1 (a))2
Rear Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))2
Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))2
Rear Shock absorber has negligible damping effect (5.3.2 (b))2
Rear reflector missing |4.8.2 |a| |ii||1
Front Horn not working |7.7 |a| |ii||1
Front wheel spindle loose |2.3.5a|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Riders seat insecure |6.2.5 |a| |ii||1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Front wheel bearings have excessive free play |2.3.5b|1
Central Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Offside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear position lamp damaged and function impaired |1.1.1b|1
Position lamp switch faulty |Main and Dipped Beam Not Working| |1.1.4a|1
Handlebar mounting insecure |2.2.1 |a| |i||1
Front Brake hose damaged and likely to fail |1.1.12 |a||1
Rear Upper Suspension rod ball joint excessively worn |5.3.4 |a| |i||1
Rear Brake lever has insufficient reserve travel brake |1.1.2 |a||1
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b||1
Upper Rear suspension bush has excessive free play |2.4.A2a|i||1
Horn not working |1.7.3a|1
Motorcycle structure excessively damaged airbox |6.1.1a|1
Headlamp aim headlamp deteriorated and function impaired too dim |1.2.3a|1
Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i||1
Steering lock stop maladjusted |2.1.3|1
Steering headbearing has excessive wear or free play Notchy & stiff on full R & L lock |2.2.2 |f| |i||1
Headlamp incorrect colour |4.1.4 |a||1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Nearside Front Headlamp light intensity severely reduced |4.1.4 |a||1
Central Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii||1
Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Rear Shock absorber insecurely attached Top Bush |5.3.2 |a| |i||1
Rear Brake cable damaged |1.1.15 |a||1
Stop lamp emits other than a steady red light |1.3.1b|1
Rear position lamp deteriorated and function impaired |1.1.1b|1
Central Front Upper Handlebar mounting clamp loose |2.1.1a|1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Rear Position lamp not working |4.2.1 |a||1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Nearside Steering lock stop maladjusted near side steering is crushing brake hose against frame. |2.1.3|1
Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Headlamp switch faulty hi/low switch |1.2.4|1
Offside Steering lock stop ineffective |2.1.3|1
Front Wheel alignment incorrect which adversely affects the steering Play side to side in steering stem |2.5.1|1
Steering lock stop ineffective No lock stop when turned n/s |2.1.3|1
Nearside Brake lever insecure |3.1.2a|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Steering lock stop ineffective to the left |2.1.3|1
Front Front wheel bearings are excessively rough |2.3.5b|1
All direction indicators not working |4.4.1 |a| |ii||1
Offside Steering linkage locking device ineffective |2.1.3 |d||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Rear Brake lever pivots excessively worn |3.1.3a|1
Rear position lamp insecure |1.1.1c|1
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Fuel pipe leaking |7.2.1a|1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear mudguard |6.1.1c|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Throttle operating incorrectly loose on bars |6.2.1f|1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Direction indicator not working |4.4.1 |a| |ii||1
Throttle control functioning such that safe operation of the motorcycle is adversely affected high revs on left lock |6.2.7 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Rear Brake lever has insufficient reserve travel |1.1.2 |a||1
Rear suspension bush has excessive free play Upper shock bush. |2.4.A2a|i||1
Front All position lamps not working |4.2.1 |a||1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Throttle operating incorrectly |6.2.1f|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Nearside Front Brake lever has insufficient reserve travel rear brake |1.1.2 |a||1
Rear position lamp incorrect colour rear lense missing white light to the rear |1.1.2b|1
Stop lamp emits other than a steady red light lense missing white light to the rear |1.3.1b|1
Nearside Rear Direction indicator not working |1.5.1c|1
Stop lamp emits other than a steady red light faded lens |1.3.1b|1
Offside Rear Direction indicator not working |1.5.1c|1
Rear Rear wheel spindle loose |2.4.A.2b|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Shock absorber has a serious fluid leak |5.3.2 |b||1
Stop lamp not working |4.3.1 |a| |ii||1
Rear All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Stop lamp not working brake light switch |4.3.1 |a| |ii||1
Front Stop lamp missing not working |1.3.3a|1
Rear Stop lamp missing not working |1.3.3a|1
Headlamp aim beam image kick up to the offside |1.6|1
Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i||1
Horn not working |7.7 |a| |ii||1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Rear wheel spindle loose |2.4.A.2b|1
Rear wheel insecure |4.2.3b|1
Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii||1
Fuel system component leaking |6.1.3 |b| |i||1
Nearside Front Direction indicator not working |1.5.1c|1
Headlamp insecure |1.2.3b|1
Front Wheel alignment incorrect which adversely affects the steering |2.4 |a||1
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii||1
Horn sound not in accordance with requirements (7.7 (c))1
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))1
Position lamp likely to become detached (4.2.1 (c) (ii))1
Central Rear Brake cable has restricted free movement (1.1.15 (e))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Front Position lamp not working (4.2.1 (a))1
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Rear Brake cable damaged (1.1.15 (a))1
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))1
Nearside Brake lever insecure (1.1.2 (e) (i))1
Position lamp not working (4.2.1 (a))1
Headlamp aim not tested (4.1.2 (b))1
Headlamp insecure (4.1.1 (c))1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Exhaust system insecure (6.1.2 (a))1
Front Headlamp insecure (4.1.1 (c))1
Rear Motorcycle structure joining/attachment plate or fastening insecure mud guard (6.1.1 (b) (i))1
Front Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced pannle (6.1.1 (b) (ii))1
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii))1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Nearside Brake lever insecure rear brake lever perch broken (1.1.2 (e) (i))1
Stop lamp does not illuminate by the operation of both brake controls does not illuminate when front brake is applied (4.3.2 (a) (iii))1
Rear brake binding1
Rear Brake grabbing severely (1.2.1 (c))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii))1
Stop lamp emits other than a steady red light (4.3.3 (a) (ii))1
Front Brake excessively binding front brake binding slightly - PRS - brake cleaner calliper & free off (1.2.1 (f))1
Horn not working (7.7 (a))1
Nearside Front Fuel hose leaking excessively or a risk of fire (6.1.3 (b) (ii))1
Exhaust silencer likely to become detached (8.1.1 (b) (ii))1
Front Valve stem seriously damaged (5.2.3 (j))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Rear Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Brake performance not tested DUE TO FLAT REAR TRE AND BRAKE LEVER BROKEN (1.2.1 (g))1
Rear Position lamp likely to become detached (4.2.1 (c) (ii))1
Nearside Front Steering operation linkage fouling when handlebars turned from lock to lock handlebar fouling leg (2.1.4 (a))1
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))1
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Headlamp aim not tested no lights (4.1.2 (b))1
Rear Wheel more than one fixing loose (5.2.1 (a) (ii))1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Steering linkage insecure to the extent there is excessive movement at the mountings (2.1.3 (a) (ii))1
Central Rear Brake grabbing severely (1.2.1 (c))1
Steering operation restricted in free movement from lock to lock cables catching rh lock (2.1.4 (c))1
Fuel cap ineffective (6.1.3 (b) (i))1
Rear Wheel spindle locking device ineffective (5.2.1 (d))1
Brake performance unable to be tested (1.2.1 (g))1
Nearside Front Brake lever insecure (1.1.2 (e) (i))1
Front Steering operation fouling on the fuel tank or bodywork on full lock Front mudguard rubbing inside of front panel - on full R/H lock (2.1.4 (b))1
All direction indicators not working R & L indicators coming on - but not flashing (4.4.1 (a) (ii))1
Handlebar mounting so insecure that steering is adversely affected headset has play on steering shaft (2.2.1 (a) (ii))1
Handlebar mounting insecure trap front wheel and handle bars can be moved side to side (2.2.1 (a) (i))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Handlebar mounting insecure (2.2.1 (a) (i))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy