| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 35 |
| Registration plate lamp issues | 34 |
| Brake hose excessively deteriorated | 9 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 9 |
| Front Brake excessively binding (1.2.1 (f)) | 9 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 7 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 7 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 6 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Rear Brake excessively binding (1.2.1 (f)) | 6 |
| Horn not working (7.7 (a)) | 5 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 4 |
| Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Headlamp insecure (4.1.1 (c)) | 3 |
| Registration plate issues | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 2 |
| Front Brake lever is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 2 |
| Front Horn not working (7.7 (a)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Rear Brake lever is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Stop lamp not working off front brake (4.3.1 (a) (ii)) | 1 |
| Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Headlamp aim not tested no dip beem (4.1.2 (b)) | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Offside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure side stand spring (6.1.1 (b) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working when operating rear brake (4.3.1 (a) (ii)) | 1 |
| Nearside Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Handlebar deformed to the extent that steering is affected Twisted/excessively off centre. (2.2.1 (c) (ii)) | 1 |
| Front Forks excessively deformed Twisted/bent. (2.2.2 (d) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling Front end twisted/bent. Advise inspection of frame etc. (2.4 (a)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Headlamp aim not tested Dip beam not working (4.1.2 (b)) | 1 |
| Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Lower Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Front Headlamp aim not tested no dip beam (4.1.2 (b)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases downpipe rotted out (6.1.2 (a)) | 1 |
| Front Handlebar retaining device loose handle bar has slight movement (2.2.1 (b) (i)) | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Brake disc significantly and obviously worn Rear Disc (1.1.14 (a) (i)) | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Motorcycle structure is so deformed it is likely to adversely affect braking or steering main stand dragging on ground (6.1.1 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Forks excessively deformed Front forks bent and out of line. (2.2.2 (d) (i)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear brake binding | 1 |
| Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Handlebar grip insecure to handlebar both (2.2.1 (d) (ii)) | 1 |
| Rear Brake lever insecure damaged (1.1.2 (e) (i)) | 1 |
| Brake excessively binding (1.2.1 (f)) | 1 |
| Horn not working remains on when pressed (7.7 (a)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Stop lamp not working from front brake (4.3.1 (a) (ii)) | 1 |
| Front Forks in such a condition that steering control is adversely affected (2.2.2 (d) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Drive belt guard insecure (6.1.7 (i)) | 1 |
| Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Rear Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement corroded (6.1.8 (a) (i)) | 1 |