MOT History from tests of petrol PEUGEOT TREKKERs year 2000

Review the list of common PEUGEOT TREKKER failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:71.92%

(The average a petrol PEUGEOT TREKKER year 2000 passes without issue)

Based on:1,923 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	79
Steering headbearing has excessive free play \|2.2.2\|	52
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	46
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	41
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	34
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	27
Registration plate issues	24
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	18
Rear reflector on motorcycle missing \|1.4.1\|	18
Front Roller brake test indicates a binding brake \|3.3.A1a\|	17
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	17
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	17
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	15
Horn not working \|1.7.3a\|	15
Headlamp insecure \|1.2.3b\|	15
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	14
Exhaust is leaking and excessively noisey \|7.1.1b\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Riders seat insecure \|6.2.1a\|	11
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Front Steering headbearing has excessive free play \|2.2.2\|	10
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	10
Offside Front Direction indicator not working \|1.5.1c\|	9
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	7
Nearside Rear Direction indicator not working \|1.5.1c\|	7
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Stop lamp affected by the operation of another lamp \|1.3.2\|	6
Headlamp aim not tested \|1.6\|	5
Front wheel bearings are excessively rough \|2.3.5b\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	5
Nearside Rear Direction indicator insecure \|1.5.3b\|	5
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Front position lamp insecure \|1.1.1c\|	4
Throttle operating incorrectly \|6.2.1f\|	4
Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	4
Direction indicators not working \|1.5.1c\|	4
Front Horn not working \|1.7.3a\|	4
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	4
Rear Brake lever insecure \|3.1.2a\|	3
Offside Front Direction indicators not working \|1.5.1c\|	3
Rear Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Direction indicator affected by the operation of another lamp \|1.5.1c\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Front Front suspension has inadequate damping effect. \|2.3.6c\|	3
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Lower Steering headbearing has excessive free play \|2.2.2\|	3
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Registration plate lamp issues	3
Rear Brake lever mounting insecure \|3.1.2a\|	3
Headlamp switch faulty \|1.2.4\|	3
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	3
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	2
Front Headlamp insecure \|1.2.3b\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Centre Front Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension assembly component excessively corroded. \|2.3.1\|	2
Motorcycle structure excessively damaged \|6.1.1a\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Indicator switch defective \|1.5.4\|	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	2
Upper Steering headbearing has excessive free play \|2.2.2\|	2
Front Direction indicators not working \|1.5.1c\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Headlamp damaged and function impaired \|1.2.3a\|	2
Horn sounds harsh or grating \|1.7.3c\|	2
Horn is not a constant note \|1.7.3c\|	2
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Horn is not continous or uniform \|1.7.3c\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Steering movement excessively rough with the wheel raised \|2.2.1b\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Horn control defective \|1.7.2a\|	2
Nearside Front suspension assembly component excessively corroded. \|2.3.1\|	2
Offside Front suspension assembly component excessively corroded. \|2.3.1\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Rear Stop lamp damaged and function impaired \|1.3.3a\|	2
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	79
Steering headbearing has excessive free play \|2.2.2\|	52
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	46
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	41
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	34
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	27
Registration plate issues	24
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	18
Rear reflector on motorcycle missing \|1.4.1\|	18
Front Roller brake test indicates a binding brake \|3.3.A1a\|	17
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	17
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	17
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	15
Horn not working \|1.7.3a\|	15
Headlamp insecure \|1.2.3b\|	15
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	14
Exhaust is leaking and excessively noisey \|7.1.1b\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Riders seat insecure \|6.2.1a\|	11
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Front Steering headbearing has excessive free play \|2.2.2\|	10
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	10
Offside Front Direction indicator not working \|1.5.1c\|	9
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	7
Nearside Rear Direction indicator not working \|1.5.1c\|	7
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Stop lamp affected by the operation of another lamp \|1.3.2\|	6
Headlamp aim not tested \|1.6\|	5
Front wheel bearings are excessively rough \|2.3.5b\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	5
Nearside Rear Direction indicator insecure \|1.5.3b\|	5
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Front position lamp insecure \|1.1.1c\|	4
Throttle operating incorrectly \|6.2.1f\|	4
Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	4
Direction indicators not working \|1.5.1c\|	4
Front Horn not working \|1.7.3a\|	4
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	4
Rear Brake lever insecure \|3.1.2a\|	3
Offside Front Direction indicators not working \|1.5.1c\|	3
Rear Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Direction indicator affected by the operation of another lamp \|1.5.1c\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Front Front suspension has inadequate damping effect. \|2.3.6c\|	3
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Lower Steering headbearing has excessive free play \|2.2.2\|	3
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Registration plate lamp issues	3
Rear Brake lever mounting insecure \|3.1.2a\|	3
Headlamp switch faulty \|1.2.4\|	3
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	3
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	2
Front Headlamp insecure \|1.2.3b\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Centre Front Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension assembly component excessively corroded. \|2.3.1\|	2
Motorcycle structure excessively damaged \|6.1.1a\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Indicator switch defective \|1.5.4\|	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	2
Upper Steering headbearing has excessive free play \|2.2.2\|	2
Front Direction indicators not working \|1.5.1c\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Headlamp damaged and function impaired \|1.2.3a\|	2
Horn sounds harsh or grating \|1.7.3c\|	2
Horn is not a constant note \|1.7.3c\|	2
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Horn is not continous or uniform \|1.7.3c\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Steering movement excessively rough with the wheel raised \|2.2.1b\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Horn control defective \|1.7.2a\|	2
Nearside Front suspension assembly component excessively corroded. \|2.3.1\|	2
Offside Front suspension assembly component excessively corroded. \|2.3.1\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Rear Stop lamp damaged and function impaired \|1.3.3a\|	2
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2

MOT History from tests of petrol PEUGEOT TREKKERs year 2000

Find us on Facebook