| Most common failures | No# failures |
|---|
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Rear brake binding | 1 |
| Offside Inner Front constant velocity joint is insecure split and insecure |2.5.C.1b| | 1 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Power steering malfunctioning |2.3.3a| | 1 |
| Engine MIL inoperative or indicates a malfunction INOP (8.2.2.2 (g)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust emissions exceed default limit of 1.5m-1 FAILED AT 2.85 (8.2.2.2 (b)) | 1 |
| Headlamp aim out of alignment | 1 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Exhaust emissions exceed default limit of 1.5m-1 PLATE MISSING - FAILED AT 3.16m-1 (8.2.2.2 (b)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced PLUS OS SILL REQ WELDING (7.1.1 (a) (i)) | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 1 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Exhaust emissions exceed default limit of 1.5m-1 Test limit - 1.50
Failure value - 2.30 (8.2.2.2 (b)) | 1 |
| Front All direction indicators incorrect colour N/S + O/S Indicators (4.4.3 (a)) | 1 |
| Rear All direction indicators incorrect colour N/S + O/S Indicators (4.4.3 (a)) | 1 |
| Nearside Front Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Upper + Lower dust covers (5.3.4 (b) (ii)) | 1 |
| Exhaust emissions exceed default limit of 1.5m-1 Test limit - 1.50
Failure value - 4.84 (8.2.2.2 (b)) | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |