>

MOT History from tests of petrol PEUGEOT SPEEDFIGHT2s year 2005

Review the list of common PEUGEOT SPEEDFIGHT2 failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:52.04%
(The average a petrol PEUGEOT SPEEDFIGHT2 year 2005 passes without issue)
Based on:98 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment8
Rear reflector on motorcycle missing |1.4.1|6
Rear shock absorber has inadequate damping effect. |2.4.A.3b|4
Registration plate issues4
Front suspension has inadequate damping effect. |2.3.6c|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Steering headbearing has excessive free play |2.2.2|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|3
Rear Brake lever has inadequate reserve travel |3.1.3b|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Rear position lamp insecure |1.1.1c|2
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Roller brake test indicates a severely juddering brake |3.3.A1b|2
Stop lamp remains on when the brake is released |1.3.1e|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Steering headbearing has excessive free play |2.2.2|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Brake hose damaged1
Front Brake hose fouling |3.2.B3b|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Offside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front wheel bearings have excessive free play |2.3.5b|1
Direction indicator missing |1.5.1a|1
Rear Plate brake test indicates a binding brake |3.3.B1a|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Rear position lamp damaged and function impaired |1.1.1b|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Steering headbearing has excessive free play |2.2.2|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii||1
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||1
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1|1
Rear Rear wheel rotation likely to be impeded |6.2.1b|1
Lower Front suspension assembly component loose fixing bolt loose |2.3.1|1
Front suspension fouling which affects the movement of the front suspension. |2.3.6a|1
Front Direction indicator not working |1.5.1c|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a|1
Front Wheel damaged significantly reducing the original strength |4.2.1a|1
Centre Rear reflector on motorcycle missing |1.4.1|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Fuel system component leaking |7.2.1a|1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Nearside Front Upper Front suspension has inadequate damping effect. |2.3.6c|1
Offside Rear Lower Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Front Indicator tell tale not functioning |1.5.2|1
Offside Steering lock stop ineffective |2.1.3|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Front Steering lock stop ineffective |2.1.3|1
Front Fairing so located that it is likely to impede the steering |2.1.2e|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear reflector on motorcycle obscured |1.4.1|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy