Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 13 |
Headlamp aim out of alignment | 7 |
Registration plate issues | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Lower Fuel system component leaking |7.2.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Rear suspension component seized |2.4A2a|ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Motorcycle structure excessively distorted forks |6.1.1a| | 1 |
Front Motorcycle structure excessively corroded forks |6.1.1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake component is severely distorted hub |3.1.5| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake cable knotted |3.2.A1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Rear position lamp missing NOT REAR SIDE LIGHT AND REFLECTOR MISSING |1.1.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |