Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Lower Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Nearside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Registration plate issues | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Horn not working |1.7.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Steering linkage has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Nearside Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |