Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Registration plate issues | 17 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 9 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 9 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 8 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 7 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 7 |
Stop lamp remains on when the brakes are released | 6 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 6 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 6 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Riders seat insecure (6.2.5 (a) (ii)) | 6 |
Rear Position lamp not working (4.2.1 (a)) | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Indicator switch defective |1.5.4| | 5 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
Stop lamp not working |4.3.1 |a| |ii|| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 5 |
Rear Position lamp not working |4.2.1 |a|| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 4 |
Nearside Front Position lamp not working |4.2.1 |a|| | 4 |
Registration plate lamp issues | 4 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 4 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Horn not working |1.7.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 3 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 3 |
Indicator switch inoperative |4.4.2 |a| |ii|| | 3 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 3 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 3 |
Horn not working (7.7 (a)) | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Exhaust system insecure |6.1.2 |a|| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Front Brake lever mounting insecure |3.1.2a| | 2 |
All position lamps not working |4.2.1 |a|| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 2 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 2 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
Offside Rear Footrest missing (6.2.12 (a)) | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 2 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension Exhaust mounted between suspension and body |2.4.A.3a| | 1 |
Rear Wheel fixing loose |multiple fixings| |5.2.1 |a| |i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Brake lever cracked |3.1.2c| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Suspension component modified so the suspension is inoperative Seized |5.3.3 |c| |ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Central Front All position lamps not working |4.2.1 |a|| | 1 |
Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Central Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake lever insecure switchgear |3.1.2a| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component bushes worn |2.3.4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride center stand split pin not fitted correctly |6.2.1h| | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Stop lamp remains on when the brake is released stop lamp staying on all the time. |1.3.1e| | 1 |
All position lamps do not illuminate immediately when switched on no front or rear lights. |1.1.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Upper Throttle operating incorrectly THROTTLE, BRAKE LEVER AND MIRROR CLUSTER EXCESSIVE PLAY |6.2.1f| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Stop lamp does not illuminate immediately a brake applies not working from front brake |1.3.1a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Stop lamp not working from rear/brake leaver |4.3.1 |a| |ii|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Footrest missing footpegs missing rear both |6.2.12 |a|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp insecure Fairing insecure which carries headlight |4.1.1 |c|| | 1 |
Front Handlebar mounting clamp loose handlebar not secured tight to fork stem |2.1.1a| | 1 |
Brake hose fouling brake hose fouls handlebar when steering turned |3.2.B3b| | 1 |
Front All position lamps not working |4.2.1 |a|| | 1 |
Front Shock absorber has negligible damping effect suspension locks down when compressed |5.3.2 |b|| | 1 |
Riders seat insecure will not lock down |6.2.1a| | 1 |
Brake lever cannot be released smoothly REAR LEVER TRUNION MISSING |3.1.3d| | 1 |
Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies front rear |1.3.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake switch faulty |1.3.1a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Shock absorber has negligible damping effect offside /nearside front |5.3.2 |b|| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Front Position lamp not working both |4.2.1 |a|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies both brake levers don`t illuminate stop light |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released brake light switch |1.3.1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies Both Levers |1.3.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp lens defective such that the emitted light is adversely affected rear |4.3.1 |b| |ii|| | 1 |
Throttle operating incorrectly assembly loose |6.2.1f| | 1 |
Front Fairings insecure and likely to impede the steering headlight panel |2.1.2e| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front position lamp insecure Mounting |1.1.1c| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly excessive movement |6.2.1f| | 1 |
Offside Stop lamp does not emit a steady light R/H BRAKE LEVER DOES NOT ACTIVATE BRAKE LIGHT |1.3.1b| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake disc significantly and obviously worn excessively scored |1.1.14 |a| |i|| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Rear Fuel system component insecure |7.2.1b| | 1 |
Rear Fairings insecure and likely to impede the steering rear mudguard loose |2.1.2e| | 1 |
Front Upper Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Lower Front wheel spindle loose fork clamp excessive movement / loose |2.3.3a| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Front Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear suspension bush has excessive free play engine mountings loose |2.4.A2a|i|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Footrest missing both passenger missing |6.2.1a| | 1 |
Position lamp not working both front |4.2.1 |a|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Rear Stop lamp not working rear brake light |4.3.1 |a| |ii|| | 1 |
Offside Brake lever insecure |1.1.2 |e| |i|| | 1 |
Rear Shock absorber has negligible damping effect Shock absorber seized |no movement| |5.3.2 |b|| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Front Wheel has bolts/rivets missing or loose to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (e) (ii)) | 1 |
Nearside Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Suspension component has excessive wear or free play (5.3.3 (d)) | 1 |
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure under seat panel has been removed (6.1.1 (b) (i)) | 1 |
Stop lamp not working Not working on either lever. (4.3.1 (a) (ii)) | 1 |
Front Road spring with an unsafe modification no suspension travel (5.3.1 (d)) | 1 |
Rear Brake excessively binding after brake released (1.2.1 (f)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Suspension component ball joint excessively worn play in fork bushes (5.3.4 (a) (i)) | 1 |
Offside Front Suspension component has excessive wear or free play Fork sliding bushes worn (5.3.3 (d)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Stop lamp not working on front brake (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Steering headbearing has excessive wear or free play steering bearings too loose (2.2.2 (f) (i)) | 1 |
Horn not working horn not working (7.7 (a) (ii)) | 1 |
Rear Brake excessively binding front brake is binding on (1.2.1 (f)) | 1 |
Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
Stop lamp not working rear switch faulty (4.3.1 (a) (ii)) | 1 |
Nearside Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
Offside Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Nearside Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Stop lamp not working from both controls (4.3.1 (a) (ii)) | 1 |
Offside Front Stop lamp not working front brake switch not working (4.3.1 (a) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp battery flat (4.4.3 (b)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp not working Front brake switch bad connection PRS (4.3.1 (a) (ii)) | 1 |
Handlebar grip insecure to handlebar Left hand grip loose on bar PRS (2.2.1 (d) (ii)) | 1 |
Rear Brake effort inadequate at a wheel BRAKE STICKING (1.2.1 (a) (i)) | 1 |
Front Stop lamp not working Front brake (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working Rear brake (4.3.1 (a) (ii)) | 1 |
Rear Brake cable has restricted free movement brake cable sticking causing rear brake light to stay on (1.1.15 (e)) | 1 |
Exhaust system insecure system held in place by plastic cable ties (6.1.2 (a)) | 1 |
Front Shock absorber has negligible damping effect Forks siezed (5.3.2 (b)) | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure battery not secure (6.1.1 (b) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Brake lever insecure (1.1.2 (e) (i)) | 1 |
Offside Front Suspension component mounting has an unsafe modification pinchbolt missing (5.3.3 (c) (i)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected forks attatchement (5.2.1 (c) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls front (4.3.2 (a) (iii)) | 1 |
Rear Position lamp not working REPLACED BULB DURING TEST (4.2.1 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Headlamp not working on dipped beam NO LOW BEAM OPERATION (4.1.1 (a) (ii)) | 1 |
Position lamp lens seriously defective FRONT HEADLIGHT INSECURE. (4.2.1 (b)) | 1 |
Direction indicator not working L/H/F INDICATOR NOT OPERATIONAL. (4.4.1 (a) (ii)) | 1 |
Direction indicator not working R/H/F INDICATOR NOT OPERATIONAL. (4.4.1 (a) (ii)) | 1 |
Position lamp not working L/H/F SIDE LIGHT NOT OPERATIONAL. (4.2.1 (a)) | 1 |
Position lamp not working R/H/F SIDE LIGHT NOT OPERATIONAL. (4.2.1 (a)) | 1 |
Handlebar grip insecure to handlebar LOOSE R/H GRIP. (2.2.1 (d) (ii)) | 1 |
Central Rear Lower Shock absorber has an excessively worn bush Lower shock absorber mounting bush (5.3.2 (c)) | 1 |
Nearside Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Position lamp not working x2 (4.2.1 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Front Shock absorber has negligible damping effect FRONT FORKS SEIZED (5.3.2 (b)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Forks insecure (2.2.2 (d) (i)) | 1 |
Front Position lamp not working both sides (4.2.1 (a)) | 1 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake excessively binding No brake test carried out (1.2.1 (f)) | 1 |
Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Front Suspension component mounting modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Wheel fixing missing (multiple fixings) (5.2.1 (a) (i)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Suspension component modified so the suspension is inoperative Forks siezed (5.3.3 (c) (ii)) | 1 |
Rear Brake performance not tested (1.2.1 (g)) | 1 |