| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Registration plate issues | 19 |
| Stop lamp remains on when the brakes are released | 15 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
| Horn not working |1.7.3a| | 10 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
| Steering headbearing has excessive free play |2.2.2| | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 8 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 7 |
| Rear Position lamp not working (4.2.1 (a)) | 7 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 6 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 6 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 6 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
| Rear Position lamp not working |4.2.1 |a|| | 5 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Front Brake excessively binding |1.2.1 |f|| | 5 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Indicator switch defective |1.5.4| | 5 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
| Riders seat insecure (6.2.5 (a) (ii)) | 5 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Registration plate lamp issues | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Upper Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Headlamp insecure (4.1.1 (c)) | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Fuel cap sealing washer missing |7.2.2c| | 2 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Offside Steering lock stop ineffective |2.1.3| | 2 |
| Rear Brake lever mounting insecure |3.1.2a| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Indicator switch insecure |1.5.4| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Nearside Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 2 |
| Offside Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected rough on turning and tight |2.2.2 |f| |ii|| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear wheel rotation likely to be impeded rear mudguard loose and insecure |6.2.1b| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Headlamp switch faulty dip beam and high beam wired backwards |1.2.4| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Front wheel insecure |4.2.3b| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Headlamp light intensity severely reduced dipped beam has very bad pattern and very dim |4.1.4 |a|| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicator deteriorated and function impaired Indicator switch failure - indicators only working intermittantly |1.5.3a| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Nearside Indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Fairings insecure and likely to impede the steering rear mud gard |2.1.2e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Stop lamp missing |4.3.1 |a| |ii|| | 1 |
| Riders seat insecure not locking |6.2.1a| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Offside Handlebar handgrip not secure to handlebars. throttle housing |2.1.1c| | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component fork bush |2.3.4| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Throttle operating incorrectly Throttle insecure |6.2.1f| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Rear Brake lever attachment screws missing |3.1.2b| | 1 |
| Stop lamp remains on when the brake is released front brake lever stop light |1.3.1e| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear mudguard |6.1.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear switch n/w |1.3.1a| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
| Centre Front Lower Front wheel spindle loose |2.3.5a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front position lamp missing both front |1.1.1a| | 1 |
| Nearside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Headlamp insecure attached to insecure body panel |4.1.1 |c|| | 1 |
| Nearside Rear Brake component insecure brake hose insecure |1.1.21 |c|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Headlamp switch insecure |1.2.4| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine is loose |6.1.1c| | 1 |
| Nearside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Rear Upper Riders seat insecure |6.2.1a| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Lower Rear shock absorber insecurely mounted bush worn |2.4.A.3b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Brake lever is damaged and the brake cannot be readily applied Broken sharp end |3.1.3c| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Suspension component modified so the suspension is inoperative not modified but inoperative |5.3.3 |c| |ii|| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear spring worn and seriously weakened |2.4A1b|ii|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear wheel rotation likely to be impeded number plate hits wheel |6.2.1b| | 1 |
| Rear wheel rotation likely to be impeded rear mudguard not fitted correctly |6.2.1b| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Sidecar direction indicator not working |1.5.1c| | 1 |
| Roller brake test indicates a binding brake front brake binding |3.3.A1a| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Brake hose damaged | 1 |
| Stop lamp remains on when the brake is released on all the time |1.3.1e| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Mud Guard |6.1.1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies o/s brake lever control 1 |1.3.1a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
| Rear Rear mono-shock insecure |2.4.B.4| | 1 |
| Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Stop lamp not working brake operation |4.3.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Brake grabbing severely front brake grabbing and dangerous |1.2.1 |c|| | 1 |
| Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. does not work |2.3.6b| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear break |1.3.1a| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Upper Rear suspension bush has excessive free play engine support |2.4.A2a|i|| | 1 |
| Rear Brake cable has restricted free movement |1.1.15 |e|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure o/s side panel |6.1.1 |b| |i|| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure front panel |6.1.1 |b| |i|| | 1 |
| Position lamp switch does not illuminate all position lamps with a single operation |4.2.2 |a|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Offside Front suspension assembly component loose spindle clamp loose |2.3.1| | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component bushes |2.3.4| | 1 |
| Offside Front suspension assembly excessive wear or free play in a front suspension component bushes |2.3.4| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Riders seat insecure (6.2.1a) | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake lever (1.3.1a) | 1 |
| Headlamp aim headlamp deteriorated and function impaired main beam image and output on non-std headlamp very poor (1.2.3a) | 1 |
| All direction indicators not working front and rear not working (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Steering headbearing has excessive wear or free play freeplay (2.2.2 (f) (i)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure Clocks/ speedo insecure (6.1.1 (b) (i)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Forks modification unsafe seized (2.2.2 (e)) | 1 |
| Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy head bearings very notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Shock absorber has negligible damping effect seized front shock,,not damping at all (5.3.2 (b)) | 1 |
| Rear Shock absorber has negligible damping effect rear shock bouncing under load .no damping effect (5.3.2 (b)) | 1 |
| Front Headlamp aim not tested dip beam not working (4.1.2 (b)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Front Upper Suspension attachment bracket/mounting insecure shock (5.3.3 (a) (i)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Stop lamp not working not working on front and rear (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
| Rear Brake cable has restricted free movement (1.1.15 (e)) | 1 |
| Fork yoke in such a condition that steering control is adversely affected (2.2.2 (d) (ii)) | 1 |
| Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Shock absorber has negligible damping effect forks stiff (5.3.2 (b)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Stop lamp not working from rear brake (4.3.1 (a) (ii)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Shock absorber has negligible damping effect FORKS SEIZED (5.3.2 (b)) | 1 |
| Steering headbearing has excessive wear or free play movement in upper and lower races. (2.2.2 (f) (i)) | 1 |
| Rear Brake excessively binding rear brake sticks on. (1.2.1 (f)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Upper Steering headbearing has excessive wear or free play steering head bearings loose (2.2.2 (f) (i)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Steering linkage locking device missing steering lock missing both locks (2.1.3 (d)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Front Brake caliper excessively corroded and likely to crack (1.1.16 (d) (ii)) | 1 |
| Rear Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
| Rear Lower Suspension component pin or bush excessively worn Shock Bush (5.3.4 (a) (i)) | 1 |
| Central Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Central Rear Stop lamp does not illuminate by the operation of both brake controls front brake stop light switch not working (4.3.2 (a) (iii)) | 1 |
| Central Front Headlamp insecure front faring and head light mount loose (4.1.1 (c)) | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Central Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Brake lever has insufficient reserve travel REAR BRAKE LEVER (1.1.2 (a)) | 1 |
| Front Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Stop lamp not working Not working from rear brake system (4.3.1 (a) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Position lamp not working both (4.2.1 (a)) | 1 |
| Offside Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect led headlight bulbs fitted (4.1.2 (c)) | 1 |
| Rear Stop lamp not working control (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |