MOT History from tests of petrol PEUGEOT SPEEDFIGHTs year 2000

Review the list of common PEUGEOT SPEEDFIGHT failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:67.30%

(The average a petrol PEUGEOT SPEEDFIGHT year 2000 passes without issue)

Based on:15,240 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	898
Rear reflector on motorcycle missing \|1.4.1\|	463
Steering headbearing has excessive free play \|2.2.2\|	453
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	340
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	286
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	282
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	272
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	271
Registration plate issues	254
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	241
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	206
Horn not working \|1.7.3a\|	160
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	159
Front suspension has inadequate damping effect. \|2.3.6c\|	156
Front wheel bearings have excessive free play \|2.3.5b\|	142
Front Steering headbearing has excessive free play \|2.2.2\|	139
Rear Rear reflector on motorcycle missing \|1.4.1\|	138
Exhaust is leaking and excessively noisey \|7.1.1b\|	135
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	119
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	109
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	99
Riders seat insecure \|6.2.1a\|	94
Front wheel bearings are excessively rough \|2.3.5b\|	92
Front shock absorber seal failed and leaking oil \|2.3.3\|	90
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	83
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	79
Nearside Front Direction indicator not working \|1.5.1c\|	78
Front Front suspension has inadequate damping effect. \|2.3.6c\|	76
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	74
Headlamp insecure \|1.2.3b\|	70
Offside Steering lock stop ineffective \|2.1.3\|	67
Offside Front Direction indicator not working \|1.5.1c\|	67
Front Brake lever has inadequate reserve travel \|3.1.3b\|	67
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	66
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	58
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	56
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	55
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	51
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	51
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	48
Front Front wheel bearings have excessive free play \|2.3.5b\|	46
Rear reflector on motorcycle obscured \|1.4.1\|	45
Horn not loud enough to be heard by another road user \|1.7.3a\|	45
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	42
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	42
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	42
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	40
Offside Front Direction indicators not working \|1.5.1c\|	40
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	40
Nearside Front Direction indicators not working \|1.5.1c\|	39
Rear position lamp insecure \|1.1.1c\|	38
Offside Front Direction indicator incorrect colour \|1.5.1b\|	38
Headlamp aim not tested \|1.6\|	38
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	37
Fairings insecure and likely to impede the steering \|2.1.2e\|	36
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	36
Rear wheel rotation likely to be impeded \|6.2.1b\|	35
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	32
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	32
Direction indicators not working \|1.5.1c\|	32
Nearside Rear Direction indicator not working \|1.5.1c\|	32
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	31
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	30
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	30
Offside Rear Direction indicator not working \|1.5.1c\|	30
Front Hydraulic brake control feels spongy \|3.1.4a\|	30
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	29
Headlamp aim beam image kick up to the offside \|1.6\|	29
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	29
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	29
Indicator tell tale not functioning \|1.5.2\|	29
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	29
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	28
Direction indicators affected by the operation of another lamp \|1.5.1c\|	27
Brake lever has inadequate reserve travel \|3.1.3b\|	27
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	27
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	26
Stop lamp affected by the operation of another lamp \|1.3.2\|	26
Front Front wheel bearings are excessively rough \|2.3.5b\|	26
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	25
Front Horn not working \|1.7.3a\|	24
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	24
Front suspension assembly component loose \|2.3.1\|	24
Throttle operating incorrectly \|6.2.1f\|	24
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	23
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	23
Rear wheel bearings have excessive free play \|2.4.A.2c\|	22
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	22
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	22
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	21
Exhaust mounting missing \|7.1.1c\|	21
Front suspension assembly component excessively bent \|2.3.1\|	21
Headlamp switch faulty \|1.2.4\|	20
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	20
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	20
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	20
Rear Hydraulic brake control feels spongy \|3.1.4a\|	20
Front Headlamp insecure \|1.2.3b\|	20
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	20
Nearside Steering lock stop ineffective \|2.1.3\|	19
Offside Steering lock stop missing \|2.1.3\|	19
Steering linkage has excessive free play \|2.2.2\|	19
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	19
Front Brake lever cannot be applied smoothly \|3.1.3d\|	19
Steering lock stop ineffective \|2.1.3\|	19
Exhaust excessively deteriorated \|7.1.1a\|	18
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	18
Front mudguard insecure \|2.3.7\|	18
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	18
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	18
Indicator switch defective \|1.5.4\|	18
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	18
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	18
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	18
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	17
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	17
Offside Front Steering lock stop ineffective \|2.1.3\|	17
Front Roller brake test indicates a binding brake \|3.3.A1a\|	16
Fuel system component leaking \|7.2.1a\|	16
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	16
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	16
Rear wheel bearings are excessively rough \|2.4.A.2c\|	16
Handlebar mounting clamp bolt loose \|2.1.1a\|	16
An item not tested \|Manual\|	15
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	15
Registration plate lamp issues	15

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

MOT History from tests of petrol PEUGEOT SPEEDFIGHTs year 2000

Find us on Facebook