Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Registration plate issues | 6 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Registration plate lamp issues | 1 |
Steering headbearing has excessive wear or free play free play |2.2.2 |f| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Inner Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Horn not working |1.7.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Seat insecure |6.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Horn not working |1.7.3a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |