Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Registration plate lamp issues | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate issues | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working |1.7.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Shock absorber has a serious fluid leak l/h fork leg. |5.3.2 |b|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Decelerometer brake test indicates a severely juddering brake |3.3.E1e| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel Front brake pulls back to the bar which is incorrect for the type of braking system |1.1.2 |a|| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap leaking Seal missing. (6.1.3 (b) (i)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen led bulbs give out wrong beam pattern (4.1.2 (a)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear brake binding | 1 |
Offside Front Brake indicates excessive fluctuation of brake effort disc (1.2.1 (e)) | 1 |