Most common failures | No# failures |
---|
Headlamp aim out of alignment | 29 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Registration plate lamp issues | 10 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Registration plate issues | 8 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Brake pipe excessively corroded | 5 |
Offside Stop lamp not working |1.2.1b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 5 |
Horn not working |1.7.3a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Front brake disc in such a condition that it is seriously weakened | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 4 |
Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 4 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 4 |
Rear brake binding | 3 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 3 |
Nearside front brake binding |3.7.B.1| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake pipe excessively chafed |3.2.B2a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Rear coil spring broken |2.4.C.1a| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Offside Front coil spring broken |2.4.C.1a| | 2 |
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Front coil spring broken |2.4.C.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 2 |
Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
Brakes imbalanced across an axle | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Rear brake application uneven | 1 |
Rear Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Stop lamp missing |1.3.3a| | 1 |
Rear Front mudguard insecure rear mudguard very loose |2.3.7| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Front Front position lamp does not face the front |1.1.1d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp not working Front stop switch |4.3.1 |a| |ii|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Body has a sharp edge caused by damage headlamp assembly accident damaged |6.1.C.1| | 1 |
Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Brake hose leaking fluid |3.2.B4| | 1 |
Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
Offside Rear Lower coil spring broken |2.4.C.1a| | 1 |
Offside Rear coil spring broken |2.4.C.1a| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Emissions not tested |8.2.1.2 |d|| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Emissions not tested |7.0| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Front Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Outer Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Front Seat belt stitching badly frayed |5.2.2b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Shock absorbers damaged to the extent that it does not function outer casing |5.3.2 |b|| | 1 |
Rear suspension bush excessively deteriorated Engine to frame mounting compliance bushes. |2.4.A2a|i|| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Driver`s airbag obviously inoperative light on |7.1.5 |c|| | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Front Exhaust system insecure bracket broken |6.1.2 |a|| | 1 |
Windscreen has damage | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Nearside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Electronic power steering warning lamp indicates a failure in the system |2.3.8| | 1 |
Upper Stop lamp not working |1.2.1b| | 1 |
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Outer Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Rear Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies Front |1.3.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar handgrip missing |2.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Brake pedal is so short that the brake cannot be readily applied end of pedal broken |1.1.2 |d|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
brake disc in such a condition that it is seriously weakened both rear discs |3.5.1i| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front Wheel bolt|s| loose |4.2.A.1e| | 1 |
Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Brake hose damaged | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Oil leaking excessively from engine From engine (8.4.1 (a) (i)) | 1 |
Offside Front Macpherson strut fractured Corroded where the spring sets (5.3.3 (b) (ii)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Side sill (6.1.1 (c) (i)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axel mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axel mount (5.3.6 (a) (i)) | 1 |
Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |