| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 23 |
| Headlamp aim out of alignment | 13 |
| Registration plate lamp issues | 12 |
| Horn not working |1.6.2a| | 5 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 3 |
| Rear parking brake recording little or no effort | 3 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Rear brake binding | 3 |
| Brakes imbalanced across an axle | 3 |
| Offside Front Upper Front position lamp|s| not working |1.1.A.3b| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Offside Upper Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Windscreen washer not working | 2 |
| Brake load sensing valve seized |3.6.E.3| | 2 |
| Rear brake application uneven | 2 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 2 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside All position lamps not working |1.1.A.3b| | 1 |
| Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside All position lamps excessively deteriorated so that they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Lower Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Lower Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Upper Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip |6.1.7 |g| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount/ jacking point |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount/ jacking point |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount |5.3.6 |a| |i|| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / step area (6.1.1 (c) (i)) | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Headlamp levelling device inoperative Headlamp not working to adjust like offside unit (4.1.5 (a)) | 1 |
| Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch area |5.3.6 |a| |i|| | 1 |
| Rear rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear An item not tested |Manual| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
| Nearside Side repeater light intensity significantly reduced (4.4.3 (a)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension bellows damaged or deteriorated and function affected (5.3.5 (b) (i)) | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
| Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Undertray insecure |8.1.1 |b| |i|| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Upper Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` interior mirror |8.3.1e| | 1 |
| Nearside Front Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch and strut mount (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Position lamp not working both front (4.2.1 (a) (ii)) | 1 |
| Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Position lamp not working both rear side lights |4.2.1 |a|| | 1 |
| Direction indicator not working both rear indicators not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp|s| not working both rear stop lights |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member at brake valve |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering at front cross member |6.1.1 |c| |ii|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both front inner steps |5.3.6 |a| |ii|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both front inner wings in varios places |5.3.6 |a| |ii|| | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Offside Front Outer Drive shaft joint so worn it is likely to fail joint worn |6.1.7 |c| |ii|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Parking brake inoperative on one side park brake readings below required readings |1.4.1 |a|| | 1 |
| Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear |8.1.2b| | 1 |
| Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Upper Steering system excessively tight |2.2.D.1| | 1 |
| Offside Front Upper Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Lower Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Suspension arm locating pin insecure (2.4.G.3a) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
| Drivers seat insecure (6.2.A.1) | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Nearside Rear Body has a sharp edge caused by damage (6.1.C.1) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer chassis (5.3.6 (a) (i)) | 1 |
| front brake binding (3.7.B.1) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s inner wings/outriggers (5.3.6 (a) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s inner/outer sills (5.3.6 (a) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s crossmember (5.3.6 (a) (i)) | 1 |
| Front Service brake excessively binding o/s and n/s (1.2.1 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected BY REAR SPRING (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL TO FLOOR (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ALL JACKING POINTS (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength IN WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected BY STEP (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL INNER AND OUTER (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OF THE SPRING MOUNTING (5.3.6 (a) (i)) | 1 |