| Most common failures | No# failures |
|---|
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Parking brake: efficiency below requirements |3.7.B.7| | 3 |
| Headlamp aim out of alignment | 2 |
| Horn not working |1.6.2a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Registration plate lamp issues | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch sill end (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded sill (1.1.21 (e) (i)) | 1 |
| Offside Front Outer Parking brake mechanism/associated mounting prescribed area is excessively corroded sill (1.1.21 (e) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Brake performance unable to be tested due to front wheel not turning (1.2.1 (g)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |rear| spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Lower Exhaust system not adequately supported |7.1.1| | 1 |
| Brake pipe excessively corroded | 1 |
| Offside Rear Seat belt stitching badly frayed |5.2.2b| | 1 |
| Centre Rear Seat belt stitching badly frayed |5.2.2b| | 1 |
| Offside Rear Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 (5.3.6 (a) (i)) | 1 |
| Electrical wiring insecure under bonnet from coolant bottle |1.9.2a| | 1 |
| Electrical wiring insecure from battery |1.9.2a| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Electrical wiring insecure |1.9.2a| | 1 |
| Steering lock fails to engage |2.1.4b| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut not locked thread not through lock nut completely |2.5.B.1a| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut loose bolt snapped 1 of 4 |2.5.B.1a| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Nearside Rear Electrical wiring insecure and connectors likely to become disconnected spring hanger area |4.11 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Registration plate issues | 1 |
| Brakes imbalanced across an axle | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Towbar component excessively corroded tow bar mount |6.6.1| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |