Most common failures | No# failures |
---|
Brake pipe excessively corroded | 22 |
Headlamp aim out of alignment | 20 |
Windscreen wiper does not clear the windscreen effectively | 11 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 10 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 10 |
Registration plate lamp issues | 10 |
Brakes imbalanced across an axle | 8 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 8 |
Exhaust system not adequately supported |7.1.1| | 7 |
Offside Rear fog lamp not working |1.3.2b| | 6 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 5 |
Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
Offside Headlamp not working on main beam |1.7.5a| | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Rear brake binding | 4 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Headlamp insecure |1.7.3| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Brake hose excessively deteriorated | 4 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Rear Mechanical brake component has restricted free movement | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Brake load sensing valve linkage seized |3.6.E.3| | 3 |
Nearside Headlamp insecure |1.7.3| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Front brake application uneven | 2 |
Brake load sensing valve seized |3.6.E.3| | 2 |
Offside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Exhaust mounting missing |7.1.1b| | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Rear brake application uneven | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Headlamp insecure |4.1.1 |c|| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Service brake lagging in operation (1.2.1 (d)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering suspension area at top |6.1.1 |c| |ii|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced riger |6.1.1 |c| |i|| | 1 |
Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
Exhaust system not adequately supported rubber mounts missing |7.1.1| | 1 |
Offside Inner Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wing at tie bar |6.1.1 |c| |ii|| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Front An item not tested |Manual| | 1 |
Nearside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Parking brake recording little or no effort |3.7.D.3a| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Service brake: efficiency below requirements |3.7.D.4| | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Seat belt flexible stalk cable has broken strands |5.2.4b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Nearside Windscreen wiper not working (3.4 (a)) | 1 |
Central Exhaust system insecure missing rubbers 2 (6.1.2 (a)) | 1 |
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Steering system excessively rough |2.2.D.1| | 1 |
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Centre Electrical wiring inadequately supported |1.9.2a| | 1 |
Nearside Rear Brake pipe fouled by moving parts INCORRECTLY ROUTED AND FOULING REAR AXLE BUMP STOP. |3.6.B.2a| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Front Exhaust has a major leak of exhaust gases PIPE HOLED. |7.1.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Emissions not tested DUE TO HOLE 75 PERCENT OF THE DIAMETER OF EXHAUST FRONT PIPE. |7.3.A.1| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
Offside Front Bumper insecure (6.1.4 (a) (i)) | 1 |
Emissions not tested (8.2.2.2 (e)) | 1 |
Brake servo inoperative |1.1.10 |a| |ii|| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 1 |
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
An item not tested |Manual| | 1 |
Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Windscreen washer not working | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Offside Headlamp insecure (4.1.1 (c)) | 1 |
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Battery insecure |1.9.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Steering column damaged and unserviceable |2.2.C.1d| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Central Exhaust has a major leak of exhaust gases and rubbers |6.1.2 |a|| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Steering column universal joint insecure to rack |2.1.5| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Fuel system component leaking return pipe at injction pump |7.2.3| | 1 |
Nearside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Offside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
Windscreen has damage | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded sill and side frame |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Brake hose has insufficient room to move | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect beam kick up wrong way |4.1.2 |c|| | 1 |
Offside Headlamp aim not tested |4.1.2 |b|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
Offside Rear Direction indicator lens defective such that the emitted light is adversely affected lamp unit damaged/showing white light |4.4.1 |b| |ii|| | 1 |
Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Offside Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Upper Brake pipe leaking |3.6.A.1| | 1 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |