>

MOT History from tests of petrol PEUGEOT METALs year 2003

Review the list of common PEUGEOT METAL failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:62.39%
(The average a petrol PEUGEOT METAL year 2003 passes without issue)
Based on:226 MOT Tests
Most common failuresNo# failures
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||14
Headlamp aim out of alignment12
Rear Brake lever has inadequate reserve travel |3.1.3b|11
Steering headbearing has excessive free play |2.2.2|10
Horn not working |1.7.3a|7
Registration plate issues7
Rear reflector on motorcycle missing |1.4.1|7
Rear shock absorber has inadequate damping effect. |2.4.A.3b|5
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Rear shock absorber seal failed and leaking oil |2.4.A.1c|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Stop lamp remains on when the brake is released |1.3.1e|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Direction indicators flashing more than 120 times per minute |1.5.1c|3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Fuel cap sealing washer missing |7.2.2c|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Brake disc|s| has excessive run out |3.2.A1m|3
Nearside Rear Direction indicator insecure |1.5.3b|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Handlebar mounting clamp loose |2.1.1a|2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|2
Front Upper Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Horn is not continous or uniform |1.7.3c|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Offside Rear Direction indicator missing |1.5.1a|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c|1
Handlebar deformed |2.1.1b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear wheel rotation likely to be impeded Rear light/mudguard insecure |6.2.1b|1
Direction indicator insecure Indicator lense |1.5.3b|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Exhaust mounting missing |7.1.1c|1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Horn is not a constant note |1.7.3c|1
Headlamp aim not tested |1.6|1
Brake lever mounting insecure |3.1.2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Direction indicator not working |1.5.1c|1
Front Steering headbearing has excessive free play |2.2.2|1
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b|1
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Upper Headlamp insecure |1.2.3b|1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Brake lever insecure |3.1.2a|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Fairings insecure and likely to impede the steering |2.1.2e|1
Centre Front Upper Horn not working |1.7.3a|1
Nearside Direction indicator not working |1.5.1c|1
Fuel cap missing |7.2.2a|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Headlamp aim beam image kick up to the offside |1.6|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Front Brake lever cannot be released smoothly |3.1.3d|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Stop lamp remains on when the brake is released |1.3.1e|1
Roller brake test indicates a sticking brake |3.3.A1a|1
Offside Headlamp switch insecure |1.2.4|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear Direction indicator insecure |1.5.3b|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Front wheel bearings are excessively rough |2.3.5b|1
Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Front Direction indicator insecure |1.5.3b|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Brake lever cracked |3.1.2c|1
Front position lamp insecure |1.1.1c|1
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Front wheel bearings have excessive free play |2.3.5b|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Exhaust has part of the system missing |7.1.1a|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy