MOT History from tests of petrol PEUGEOT LUDIXs year 2006

Review the list of common PEUGEOT LUDIX failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:76.99%

(The average a petrol PEUGEOT LUDIX year 2006 passes without issue)

Based on:2,929 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	90
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	63
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	59
Steering headbearing has excessive free play \|2.2.2\|	37
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	37
Exhaust is leaking and excessively noisey \|7.1.1b\|	29
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	28
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	21
Rear wheel bearings have excessive free play \|2.4.A.2c\|	21
Front Brake lever has inadequate reserve travel \|3.1.3b\|	19
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	18
Registration plate issues	18
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	18
Headlamp insecure \|1.2.3b\|	17
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	15
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	15
Brake lever has inadequate reserve travel \|3.1.3b\|	13
Fuel cap sealing washer missing \|7.2.2c\|	13
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	12
Horn not working \|1.7.3a\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	11
Front wheel bearings are excessively rough \|2.3.5b\|	11
Rear wheel rotation likely to be impeded \|6.2.1b\|	10
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	10
Fuel system component leaking \|7.2.1a\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	10
Throttle operating incorrectly \|6.2.1f\|	10
Riders seat insecure \|6.2.1a\|	10
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	10
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Horn not loud enough to be heard by another road user \|1.7.3a\|	9
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	8
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Nearside Rear Direction indicator insecure \|1.5.3b\|	8
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	7
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	7
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	5
Offside Steering lock stop ineffective \|2.1.3\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Nearside Steering lock stop ineffective \|2.1.3\|	5
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	5
Front Lower Steering headbearing has excessive free play \|2.2.2\|	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front suspension assembly component excessively bent \|2.3.1\|	4
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	4
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	4
Nearside Front Direction indicators not working \|1.5.1c\|	4
Headlamp aim not tested \|1.6\|	4
Stop lamp affected by the operation of another lamp \|1.3.2\|	4
Offside Direction indicators not working \|1.5.1c\|	4
Front wheel bearings have excessive free play \|2.3.5b\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Fuel system component insecure \|7.2.1b\|	4
Front Hydraulic brake control feels spongy \|3.1.4a\|	4
Handlebar mounting clamp loose \|2.1.1a\|	4
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	4
Offside Brake lever has inadequate reserve travel \|3.1.3b\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Front Horn not working \|1.7.3a\|	3
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	3
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	3
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Position lamp not working (4.2.1 (a))	3
Stop lamp not working (4.3.1 (a) (ii))	3
Steering movement excessively rough with the wheel raised \|2.2.1b\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	90
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	63
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	59
Steering headbearing has excessive free play \|2.2.2\|	37
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	37
Exhaust is leaking and excessively noisey \|7.1.1b\|	29
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	28
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	21
Rear wheel bearings have excessive free play \|2.4.A.2c\|	21
Front Brake lever has inadequate reserve travel \|3.1.3b\|	19
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	18
Registration plate issues	18
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	18
Headlamp insecure \|1.2.3b\|	17
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	15
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	15
Brake lever has inadequate reserve travel \|3.1.3b\|	13
Fuel cap sealing washer missing \|7.2.2c\|	13
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	12
Horn not working \|1.7.3a\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	11
Front wheel bearings are excessively rough \|2.3.5b\|	11
Rear wheel rotation likely to be impeded \|6.2.1b\|	10
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	10
Fuel system component leaking \|7.2.1a\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	10
Throttle operating incorrectly \|6.2.1f\|	10
Riders seat insecure \|6.2.1a\|	10
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	10
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Horn not loud enough to be heard by another road user \|1.7.3a\|	9
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	8
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Nearside Rear Direction indicator insecure \|1.5.3b\|	8
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	7
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	7
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	5
Offside Steering lock stop ineffective \|2.1.3\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Nearside Steering lock stop ineffective \|2.1.3\|	5
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	5
Front Lower Steering headbearing has excessive free play \|2.2.2\|	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front suspension assembly component excessively bent \|2.3.1\|	4
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	4
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	4
Nearside Front Direction indicators not working \|1.5.1c\|	4
Headlamp aim not tested \|1.6\|	4
Stop lamp affected by the operation of another lamp \|1.3.2\|	4
Offside Direction indicators not working \|1.5.1c\|	4
Front wheel bearings have excessive free play \|2.3.5b\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Fuel system component insecure \|7.2.1b\|	4
Front Hydraulic brake control feels spongy \|3.1.4a\|	4
Handlebar mounting clamp loose \|2.1.1a\|	4
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	4
Offside Brake lever has inadequate reserve travel \|3.1.3b\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Front Horn not working \|1.7.3a\|	3
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	3
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	3
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Position lamp not working (4.2.1 (a))	3
Stop lamp not working (4.3.1 (a) (ii))	3
Steering movement excessively rough with the wheel raised \|2.2.1b\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3

MOT History from tests of petrol PEUGEOT LUDIXs year 2006

Find us on Facebook