MOT History from tests of petrol PEUGEOT LUDIXs year 2005

Review the list of common PEUGEOT LUDIX failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:74.04%

(The average a petrol PEUGEOT LUDIX year 2005 passes without issue)

Based on:3,917 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	129
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	115
Steering headbearing has excessive free play \|2.2.2\|	69
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	65
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	61
Exhaust is leaking and excessively noisey \|7.1.1b\|	60
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	49
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	41
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	38
Horn not working \|1.7.3a\|	37
Rear wheel bearings have excessive free play \|2.4.A.2c\|	36
Registration plate issues	35
Front Brake lever has inadequate reserve travel \|3.1.3b\|	32
Front wheel bearings are excessively rough \|2.3.5b\|	29
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	25
Rear reflector on motorcycle missing \|1.4.1\|	24
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	24
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	23
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	20
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	19
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Front wheel bearings have excessive free play \|2.3.5b\|	18
Brake lever has inadequate reserve travel \|3.1.3b\|	16
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	16
Offside Rear Direction indicator not working \|1.5.1c\|	16
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	15
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	15
Headlamp insecure \|1.2.3b\|	15
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	14
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	14
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	13
Offside Rear Direction indicators not working \|1.5.1c\|	13
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	13
Nearside Rear Direction indicator not working \|1.5.1c\|	13
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	12
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	11
Front Roller brake test indicates a binding brake \|3.3.A1a\|	11
Nearside Rear Direction indicator insecure \|1.5.3b\|	10
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	10
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	10
Exhaust excessively deteriorated \|7.1.1a\|	10
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	10
Fuel cap sealing washer missing \|7.2.2c\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Rear wheel rotation likely to be impeded \|6.2.1b\|	10
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	9
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	9
Indicator tell tale not functioning \|1.5.2\|	9
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Front suspension has inadequate damping effect. \|2.3.6c\|	9
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	9
Riders seat insecure \|6.2.1a\|	8
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	8
Front Steering headbearing has excessive free play \|2.2.2\|	8
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	8
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	8
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	7
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Horn sounds harsh or grating \|1.7.3c\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Front Horn not working \|1.7.3a\|	6
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	6
Nearside Steering lock stop ineffective \|2.1.3\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Fuel system component leaking \|7.2.1a\|	5
Horn is not a constant note \|1.7.3c\|	5
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Handlebar mounting clamp loose \|2.1.1a\|	5
Front Front wheel bearings are excessively rough \|2.3.5b\|	5
Front Steering movement excessively stiff with the wheel raised \|2.2.1b\|	5
Front suspension assembly component excessively bent \|2.3.1\|	5
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	5
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Direction indicators not working \|1.5.1c\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Nearside Rear Footrest missing \|6.2.1a\|	4
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Indicator switch defective \|1.5.4\|	4
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Direction indicator not working \|1.5.1c\|	4
An item not tested \|Manual\|	4
Rear Direction indicator not working \|1.5.1c\|	4
Stop lamp remains on when the brakes are released	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Headlamp aim not tested \|1.6\|	4
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	4
Rear Front mudguard insecure \|2.3.7\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Rear wheel insecure \|4.2.3b\|	4
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Plate brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.B2b\|	4
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	129
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	115
Steering headbearing has excessive free play \|2.2.2\|	69
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	65
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	61
Exhaust is leaking and excessively noisey \|7.1.1b\|	60
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	49
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	41
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	38
Horn not working \|1.7.3a\|	37
Rear wheel bearings have excessive free play \|2.4.A.2c\|	36
Registration plate issues	35
Front Brake lever has inadequate reserve travel \|3.1.3b\|	32
Front wheel bearings are excessively rough \|2.3.5b\|	29
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	25
Rear reflector on motorcycle missing \|1.4.1\|	24
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	24
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	23
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	20
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	19
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Front wheel bearings have excessive free play \|2.3.5b\|	18
Brake lever has inadequate reserve travel \|3.1.3b\|	16
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	16
Offside Rear Direction indicator not working \|1.5.1c\|	16
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	15
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	15
Headlamp insecure \|1.2.3b\|	15
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	14
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	14
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	13
Offside Rear Direction indicators not working \|1.5.1c\|	13
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	13
Nearside Rear Direction indicator not working \|1.5.1c\|	13
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	12
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	11
Front Roller brake test indicates a binding brake \|3.3.A1a\|	11
Nearside Rear Direction indicator insecure \|1.5.3b\|	10
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	10
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	10
Exhaust excessively deteriorated \|7.1.1a\|	10
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	10
Fuel cap sealing washer missing \|7.2.2c\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Rear wheel rotation likely to be impeded \|6.2.1b\|	10
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	9
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	9
Indicator tell tale not functioning \|1.5.2\|	9
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Front suspension has inadequate damping effect. \|2.3.6c\|	9
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	9
Riders seat insecure \|6.2.1a\|	8
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	8
Front Steering headbearing has excessive free play \|2.2.2\|	8
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	8
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	8
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	7
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	7
Horn sounds harsh or grating \|1.7.3c\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Front Horn not working \|1.7.3a\|	6
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	6
Nearside Steering lock stop ineffective \|2.1.3\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Fuel system component leaking \|7.2.1a\|	5
Horn is not a constant note \|1.7.3c\|	5
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Handlebar mounting clamp loose \|2.1.1a\|	5
Front Front wheel bearings are excessively rough \|2.3.5b\|	5
Front Steering movement excessively stiff with the wheel raised \|2.2.1b\|	5
Front suspension assembly component excessively bent \|2.3.1\|	5
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	5
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Direction indicators not working \|1.5.1c\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Nearside Rear Footrest missing \|6.2.1a\|	4
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Indicator switch defective \|1.5.4\|	4
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Direction indicator not working \|1.5.1c\|	4
An item not tested \|Manual\|	4
Rear Direction indicator not working \|1.5.1c\|	4
Stop lamp remains on when the brakes are released	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Headlamp aim not tested \|1.6\|	4
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	4
Rear Front mudguard insecure \|2.3.7\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Rear wheel insecure \|4.2.3b\|	4
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Plate brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.B2b\|	4
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4

MOT History from tests of petrol PEUGEOT LUDIXs year 2005

Find us on Facebook