Most common failures | No# failures |
---|
Headlamp aim out of alignment | 49 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Registration plate issues | 6 |
Fuel cap sealing washer missing |7.2.2c| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Horn not working |1.7.3a| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front suspension assembly component excessively corroded. |2.3.1| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
An item not tested |Manual| | 1 |
Nearside Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front Front suspension assembly component cracked |2.3.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Brake hose leaking fluid |3.2.B4| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Brake lever mounting insecure |3.1.2a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust excessively deteriorated exhaust front pipe brocken |7.1.1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam aim not tested |1.2.2a|i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering headbearing has excessive wear or free play adjustment required |2.2.2 |f| |i|| | 1 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |