>

MOT History from tests of petrol PEUGEOT JETFORCE50C-TECHs year 2006

Review the list of common PEUGEOT JETFORCE50C-TECH failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:55.00%
(The average a petrol PEUGEOT JETFORCE50C-TECH year 2006 passes without issue)
Based on:40 MOT Tests
Most common failuresNo# failures
Registration plate issues6
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Headlamp aim out of alignment2
Front wheel bearings have excessive free play |2.3.5b|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
An item not tested |Manual|1
Fuel system component leaking |7.2.1a|1
Exhaust mounting missing |7.1.1c|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear reflector on motorcycle obscured |1.4.1|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Fuel system component insecure |7.2.1b|1
Fuel hose leaking |7.2.1a|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Centre Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front Fairing insecure and likely to impede the steering |2.1.2e|1
Nearside Front Steering lock stop ineffective |2.1.3|1
Offside Front Steering lock stop ineffective |2.1.3|1
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Rear Brake disc|s| excessively scored |3.2.A1l|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy