Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Steering headbearing has excessive free play |2.2.2| | 13 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Registration plate issues | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Horn not working |1.7.3a| | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Rear Brake pipe inadequately supported |3.2.B2b| | 2 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Lower Front suspension assembly component cracked |2.3.1| | 1 |
Offside Front Lower Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Wheel bearing has excessive play REAR HUB BEARINGS? (5.1.3 (a) (i)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Headlamp not working on dipped beam Lamp adjuster damaged. (4.1.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake light. |1.3.1a| | 1 |
Front position lamp obscured more than 50% |1.1.1d| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Front Upper Steering lock stop missing |2.1.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Shock absorber has negligible damping effect suspension appears seized, no movement. (5.3.2 (b)) | 1 |
Rear Lower Suspension attachment bracket/mounting insecure shock absorber nut missing (5.3.3 (a) (i)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake master cylinder severely damaged |3.2.B1b| | 1 |
All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
Pillion seat insecure |6.2.6 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Upper Front suspension assembly component loose |2.3.1| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Steering operation restricted in free movement from lock to lock head races very rough operation |2.1.4 |c|| | 1 |
Suspension component likely to fail rear suspension partially seized |5.3.3 |b| |ii|| | 1 |
Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Brake lever excessively damaged |3.2.A1c| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |