Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 30 |
Registration plate issues | 20 |
Steering headbearing has excessive free play |2.2.2| | 16 |
Exhaust is leaking and excessively noisey |7.1.1b| | 16 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Front wheel bearings are excessively rough |2.3.5b| | 11 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 10 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Horn not working |1.7.3a| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Steering lock stop ineffective |2.1.3| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Steering lock stop missing |2.1.3| | 4 |
Nearside Steering lock stop missing |2.1.3| | 4 |
Riders seat insecure |6.2.1a| | 3 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 3 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Front Steering lock stop missing |2.1.3| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Seat insecure |6.2.1a| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Brake performance not tested |3.3| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Centre Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies stop light does not work |1.3.1a| | 1 |
Nearside Rear Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Centre Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear Lower Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Front Leg shield so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
An item not tested |Manual| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Centre Riders seat insecure |6.2.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Lower Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Front Upper Brake lever mounting insecure |3.1.2a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Shock absorber has a serious fluid leak both forks |5.3.2 |b|| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Rear position lamp missing |1.1.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Headlamp insecure |1.2.3b| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Lower Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Steering movement excessively stiff with the wheel raised right hand lock |2.2.1b| | 1 |
Exhaust mounting missing end can strap |7.1.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Inner Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Inner Rear Lower Rear wheel insecure |4.2.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Nearside Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Fuel pipe union leaking |7.2.1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |