Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 12 |
Registration plate issues | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Exhaust mounting missing |7.1.1c| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Seat insecure |6.2.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Indicator switch insecure |1.5.4| | 2 |
An item not tested |Manual| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pipe inadequately supported pipe to to rear caliper |3.2.B2b| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Offside Front suspension assembly component cracked |2.3.1| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Horn control defective |1.7.2a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has inadequate reserve travel Aftermarket cranked type fitted |3.1.3b| | 1 |
Rear Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp insecure |1.2.3b| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Fuel cap ineffective not secure (6.1.3 (b) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear An item not tested |Manual| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Outer Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Horn not working |1.7.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Registration plate lamp issues | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Steering lock stop missing no restriction on O/S lock |2.1.3| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Headlamp switch insecure |1.2.4| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |