MOT History from tests of petrol PEUGEOT HYMERMOBILs year 1988

Review the list of common PEUGEOT HYMERMOBIL failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:23.53%

(The average a petrol PEUGEOT HYMERMOBIL year 1988 passes without issue)

Based on:17 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	8
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Headlamp insecure \|1.7.3\|	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions carbon monoxide content excessive \|8.2.1.2 \|b\|\|	1
Exhaust emissions hydrocarbon content excessive \|8.2.1.2 \|b\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf support \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf support \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened \|5.3.3 \|b\| \|i\|\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Fuel system component leaking pump \|7.2.3\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Upper Brake pipe leaking \|3.6.A.1\|	1
Front Fuel system component leaking \|7.2.3\|	1
Rear Mechanical brake component has restricted free movement	1
Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Bonnet cannot be secured in the closed position \|8.4.1\|	1
Offside Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Offside Front position lamp\|s\| insecure \|1.1.A.3a\|	1
Nearside Front Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Offside Front Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Registration plate lamp issues	1
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Nearside Rear wheel bearing has excessive play \|2.6.2\|	1
Offside Rear wheel bearing has excessive play \|2.6.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Rear fog lamp missing \|1.3.2a\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	8
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Headlamp insecure \|1.7.3\|	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions carbon monoxide content excessive \|8.2.1.2 \|b\|\|	1
Exhaust emissions hydrocarbon content excessive \|8.2.1.2 \|b\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf support \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf support \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened \|5.3.3 \|b\| \|i\|\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Fuel system component leaking pump \|7.2.3\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Upper Brake pipe leaking \|3.6.A.1\|	1
Front Fuel system component leaking \|7.2.3\|	1
Rear Mechanical brake component has restricted free movement	1
Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Bonnet cannot be secured in the closed position \|8.4.1\|	1
Offside Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Offside Front position lamp\|s\| insecure \|1.1.A.3a\|	1
Nearside Front Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Offside Front Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Registration plate lamp issues	1
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Nearside Rear wheel bearing has excessive play \|2.6.2\|	1
Offside Rear wheel bearing has excessive play \|2.6.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Rear fog lamp missing \|1.3.2a\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1

MOT History from tests of petrol PEUGEOT HYMERMOBILs year 1988

Find us on Facebook